HID retrofit DONE !!! *new NIGHT pics!, halogen < HID Options

[Rayme]

Ohw finally! It took me over a month of gathering peices and hardware and countless hours and sweat and tears and days of pissing my GF off but its finally over...my retrofit it 100% sucessful!

So what you get when you mix lexus denso ballasts, philips 4300K bulbs, FX35 bi-xenon and custom clear lens???













JDM projector looking headlights but BETTER! -by the way I still need to install shrouds over the projectors to finish off the look..I didn't receive them yet


In the process I experimented with the headlights

Here's with the stock headlight :





And here's with a clear lens...really ****ty! For those thinking of buying clear lens, this is what you get!






and HIDs before I adjusted the pitch and rotation...and just one for that matter




I'm sorry for the NIGHT pics, this camera suck ass and I was too excited..and its late, I had to post it hah!
I will post more daytime picture tomorrow, promise. If some of you want this, I will offer a HID retrofit service soon and even sell clear lens if you don't have any. -thanks for looking!

This post has been edited by Rayme: Aug 9, 2007 - 9:59 PM

[cjh4l22]

ok so i'm a little lost here can someone explain all the different pieces of the projector headlights? because i've been searching for pieces on ebay and found some from an acura tsx and want some details on how to pull this off.. i guess a write up would be much appreciated too..

[elvasoshexai]

ok so i'm a little lost here can someone explain all the different pieces of the projector headlights? because i've been searching for pieces on ebay and found some from an acura tsx and want some details on how to pull this off.. i guess a write up would be much appreciated too..

i used JDM projector headlights for my retrofit. they are one piece. you have to actually cut them out, and somehow attach the projectors (epoxy/glue/yadayada)

so u really just need the HID projectors... a set of ballasts... the bulbs... wiring harness w/ relay/fuse

if u r using stock non-projector headlights... u should buy the clear lens from dustin's gb i think it is and u cut a hole in the back big enuff to fit the projector in and it's basically same procedure

i believe u can find more info over @ hidplanet forums... i think they hv a diy on an integra or sumthin as well

This post has been edited by elvasoshexai: Sep 27, 2007 - 12:15 PM