 Broken spark plug wire, it's stuck!!!! |
 Sep 30, 2007 - 5:46 PM
|
 
|
|
Enthusiast Joined Dec 25, '05 From Gainesville, FL Currently Offline Reputation: 0 (0%)  |
So I was doing a tune up on my 94 GT, and as I was changing out the wires on cylinder 2 the wire fell apart. The little rubber boot thing is still down the well around the spark plug. What is the best way to get it out? I don't have any needle-nose plyers that can reach, nor does Lowes or HD have any. I also tried to use a wire hanger to jimmy it out, but nothing. I am out of ideas.
Also, any suggestions on how to prevent this from happening again? Thanks |
Posts in this topic
njccmd2002 Ghetto style: you can try with a fish hook and a ... Sep 30, 2007 - 6:36 PM Remy I had the same problem when I first changed the sp... Sep 30, 2007 - 8:30 PM Bitter they make special pliers to grab them actually. s... Sep 30, 2007 - 8:47 PM
John93GT I tried the needle nose pliers but all the ones I ... Sep 30, 2007 - 9:03 PM bufferdan Here is what you do... Take the right size socket... Oct 1, 2007 - 8:47 AM GriffGirl The worst case scenario is you'll have to remo... Oct 1, 2007 - 3:04 PM 1bwilson Removing the VC isnt going to help anything, the s... Oct 1, 2007 - 3:56 PM John93GT These wires are actually being replaced ahead of s... Oct 1, 2007 - 5:12 PM Bitter spray the hole with brake cleaner and then wd40. t... Oct 1, 2007 - 7:36 PM John93GT Finally got it!!!! I ended up heat... Oct 1, 2007 - 11:06 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 12th, 2025 - 9:36 PM |