My 5sfTe project, Photo's are big 56k warning... sorry Options

[1bwilson]

So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.

What I have:

Built 5sfe:
CP pistons - In
3sgte rods - In
crank milled to fit the rods - In
PP'd head - In
Metal head gasket - In
ARP head studs - In

Turbo parts:
3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In
DG custom IC piping - In
Ebay intercooler (cant remember the size) - In
Injectors 460cc - In
Walbro fuel pump - In
Greddy Type S bov - In
KO Racing DP - In
DG custom Mid pipe - In
SPark plugs gapped properly - In

Other stuff:
Oil filter - Done
Batt relocated to trunk - In
Devils own WI kit - In
Turbo xs manual boost controller - In
Emanage ultimate - here, waiting on the harness.
Boost gauge - In
EGT Gauge - In
AEM UEGO - In

Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s.

This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM

[1bwilson]

Ok heres a bunch more pictures I took today. Didnt get the couplings I was hoping for (Snail mail is running wayyy late. If I dont get them tomorrow Im going to start calling about them).

Got the IC piping off while I run some of the gauge lines and senders.


Stock O2 and UEGO WIdeband on the KO downpipe.


You can see exactly how tight of a fit the KO downpipe is to the earls relocater.


EGT hole cut into the heat shield for the bung and sender... I guess you could say thats the bung hole in the heat shield


Hole in the fire wall with a nice grommet for all the gauge wires.


My mess that will soon be the gauge settup behind the Lotek 3 piller pod.


Few shots of my DG midpipe.



And now the Batt relocation and RCR strut bar . Starts here along with a slight cruise control relocation.


Running under the car.


Into the trunk and threw the carpet.








Still enough room for a set of golf clubs to fit in the back!

This post has been edited by 1bwilson: Oct 27, 2007 - 6:02 PM