Installing Gauges, problems Options

[coustoe]

Hey I finally got around to installing my indiglo gauges. I read the description, pretty straight-forward. I just got stuck at the wiring part. The red and black power wires from the indiglo gauges should be connected to the green white and black white wires on the dimmer socket switch right? I did this and none of my gauges lighted up, course i didnt sauder the connection so it couldve been lose. Just wanna see if im doing it right.

Also I got this weird looking ribben with colored dotted pad at the end connected to the same black box that the red and black wires are connected to. Anyone know what i do with this?

[Guest_Matthew_*]

there are a lot of replies here and forkee is the most right. The best way, in my opinion, is to ground it to your cd player and put the power wire into the spot for the fuse that controls the guage cluster and then put the fuse back in. No need to solder and any tape. The only problem that I had was getting them around the round piece at the end of the needles. That was a bit*h.