brake light fuse [now my car won't start], New JDM tails beginning to sound like bad news! read update Options

[Lovo]

I just installed some JDM tails that I purchased on the B/S forum... I went to check my brakes and they wouldn't come on, so I checked the bulbs first... they're fine. I switched whatever harness it came with to my own to see if it was the wiring on the harnesses from the lights... Still no brakes, so I look for a burned fuse with the old harnesses still plugged up. Fuse 15a for "Stop" under the dimmer was burned. So I put in a fresh one and stepped on the brakes with the old harnesses plugged up. No brake lights...

I'm almost starting to think I've been driving without brake lights for a few days and I probably just haven't noticed.

What do you guys think? I don't really want to drive around without a brake light... so I want to get this fixed in the morning... ahhh the sweet smell of urgency... can you smell it?

This post has been edited by Lovo: Oct 5, 2007 - 6:24 PM

[Lovo]

Maybe there was something slowly killing my car because now the battery drains, and the car won't turn on... I think the kill switch on my alarm activated... and I really can't control my alarm, because the remote is, simply put, absolutely retarded; it doesn't really pick up the signal on the alarm for whatever reason. So now I have a car that won't turn on because the kill switch is activated... or maybe it is something else. When I turn the key the car makes absolutely no sound, but the power is fine. everything turns on fine... EXCEPT the car won't crank... or even try to crank.

I disconnected the brain of the alarm to see if it was the alarm... still no help... this really sucks.

This post has been edited by Lovo: Oct 5, 2007 - 6:41 PM