Paintjob time Options

[NaderG]

I know this question been asked a million time , but i still need to ask it :
How much should i expect to pay for a good paintjob ? i dont want o pay over 2k and i dont want to paint it somewhere too cheap ( maaco , earlscheib) .... so how much quality should i expect for the price ...etc

[CelicaST_CALI]

to take off emblems,u:
Items needed:
· Hairdryer
· 20+ pound fishing line or dental floss
· Pair of gloves (preferably thick)
· Some type of goo remover

Step One:
The first thing you should do is wash the vehicle to free it from any dirt and debris. You do not want to have any small particles get between the paint and the badges when you are trying to remove them. Washing the vehicle first will allow for a clean surface and reduce the risk of scratching the paint.

Step Two:
Use a hairdryer to heat up the badges. Be careful when doing this as you do not want to get too close to the paint or use too much heat. This can damage the paint, so use just enough heat so that the adhesive on the back of the badge softens up a little bit. If you are not comfortable in using a hairdryer or do not have a hair dryer, you can let the vehicle sit in the direct sun for a few hours on a hot day to soften the adhesive.

Step Three:
You will need some fishing line or dental floss. If you choose to use fishing line, get a high breaking strength such as twenty pound or more so it will not break continuously. I chose to use dental floss because that is what I had on hand. Dental floss will break a few times, but it is cheap and it gets the job done. Wear gloves for this part because both the fishing line and the dental floss can cut into your hand. Take the string of line or floss and start flossing through the back of the badge. This will cut between the paint and the back of the badge releasing it from the vehicle. Continue doing this until the badge is off. You may need to heat it up as you go to keep the adhesive soft.
Step Four:

Once the badges are removed you will be left with some sticky goo on the paint. Some simple goo remover will take this off. Once the surface is clean and free from any residue, you can re-wash and wax the area to get it sparkling like the rest of your paint!

You now have a clean and uncluttered surface on your vehicle.

copy and paste is god...lol theres a vid somewhere on the net lol

This post has been edited by CelicaST_CALI: Oct 8, 2007 - 10:03 PM

[NaderG]

to take off emblems,u:
Items needed:
· Hairdryer
· 20+ pound fishing line or dental floss
· Pair of gloves (preferably thick)
· Some type of goo remover

Step One:
The first thing you should do is wash the vehicle to free it from any dirt and debris. You do not want to have any small particles get between the paint and the badges when you are trying to remove them. Washing the vehicle first will allow for a clean surface and reduce the risk of scratching the paint.

Step Two:
Use a hairdryer to heat up the badges. Be careful when doing this as you do not want to get too close to the paint or use too much heat. This can damage the paint, so use just enough heat so that the adhesive on the back of the badge softens up a little bit. If you are not comfortable in using a hairdryer or do not have a hair dryer, you can let the vehicle sit in the direct sun for a few hours on a hot day to soften the adhesive.

Step Three:
You will need some fishing line or dental floss. If you choose to use fishing line, get a high breaking strength such as twenty pound or more so it will not break continuously. I chose to use dental floss because that is what I had on hand. Dental floss will break a few times, but it is cheap and it gets the job done. Wear gloves for this part because both the fishing line and the dental floss can cut into your hand. Take the string of line or floss and start flossing through the back of the badge. This will cut between the paint and the back of the badge releasing it from the vehicle. Continue doing this until the badge is off. You may need to heat it up as you go to keep the adhesive soft.
Step Four:

Once the badges are removed you will be left with some sticky goo on the paint. Some simple goo remover will take this off. Once the surface is clean and free from any residue, you can re-wash and wax the area to get it sparkling like the rest of your paint!

You now have a clean and uncluttered surface on your vehicle.

copy and paste is god...lol theres a vid somewhere on the net lol

how do i remove the main ones from the front bumper and the back ??