My 5sfTe project, Photo's are big 56k warning... sorry Options

[1bwilson]

So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.

What I have:

Built 5sfe:
CP pistons - In
3sgte rods - In
crank milled to fit the rods - In
PP'd head - In
Metal head gasket - In
ARP head studs - In

Turbo parts:
3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In
DG custom IC piping - In
Ebay intercooler (cant remember the size) - In
Injectors 460cc - In
Walbro fuel pump - In
Greddy Type S bov - In
KO Racing DP - In
DG custom Mid pipe - In
SPark plugs gapped properly - In

Other stuff:
Oil filter - Done
Batt relocated to trunk - In
Devils own WI kit - In
Turbo xs manual boost controller - In
Emanage ultimate - here, waiting on the harness.
Boost gauge - In
EGT Gauge - In
AEM UEGO - In

Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s.

This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM

[1bwilson]

So im not getting oil flow. My relocater is getting oil to the filter, the cams are not getting oil, the sender unit is not getting oil, the turbo is not getting oil. Since some oil is flowing Im going to hope that means the pump is working and that something is just not flowing properly.

First thought is the earls filter, Ill get this noob question out of the way, could I have the lines mixed up with the relocater to be getting the wrong flow? I assumed it didnt matter but then again its something so easy to do I didnt put any thought into the actual lines besides keeping them run safely.