![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.
What I have: Built 5sfe: CP pistons - In 3sgte rods - In crank milled to fit the rods - In PP'd head - In Metal head gasket - In ARP head studs - In Turbo parts: 3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In DG custom IC piping - In Ebay intercooler (cant remember the size) - In Injectors 460cc - In Walbro fuel pump - In Greddy Type S bov - In KO Racing DP - In DG custom Mid pipe - In SPark plugs gapped properly - In Other stuff: Oil filter - Done Batt relocated to trunk - In Devils own WI kit - In Turbo xs manual boost controller - In Emanage ultimate - here, waiting on the harness. Boost gauge - In EGT Gauge - In AEM UEGO - In Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s. This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM -------------------- Member of Team 5sfTe
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
To be honest I couldnt possibly remember and add all the costs up. Id say Ive spend very close to 3k in turbo parts + another 3k in the motor build/rebuild. Looking back now Id say a very reliable kit could be built with right around 2k for everything pre-tuning. I have done all work on my car minus the tranny swap back in 00 (was a auto) and the motor rebuild in 04.
The hood is beautiful when I wet it still. Its been threw alot, it was the first (first member on this site at least) CF hood for the 6th gen installed over 6 years ago. The milky look is from the clear coat/gel coat. Im working on how to fix it. So far restoring it has been a bit of a challange. Just a shot of the hood in its better years ![]() ![]() This post has been edited by 1bwilson: Oct 14, 2007 - 3:45 PM -------------------- Member of Team 5sfTe
|
![]() ![]() |
Lo-Fi Version | Time is now: February 20th, 2025 - 2:53 AM |