Finaly done....or am I?... *UPDATED Nov 3*, Starting winterizing/rear end overhaul Options

[Valo666]

So, after talkin it through with alot of my friends, parents, family, etc. I decided that Im gonna keep my celica. Im gonna still be taking it off the road for a few months. So i decided that while its off the road, and im working im gonna put some $ into the car to get it back up to par of where i want it. So i decided to do a list of things i need to get done with the car. My goal is to have it all done by august 1st. So...pretty much, i need to get all of this done in the next 5 months or so.

Tint windows, re-upholster/re-cover rear seats, fix seat back *amp pulled the backing of my rear seats off cuz of its weight*, move amp *obvious reasons*, get oem strut bar covers for rear, weld up e-brake bracket *part of it got ripped off and i gotta tig weld it back into place*, clean up/paint calipers, buy new/used rear controll arms, recondition controll arms, install control arms, get new window gaskets and install them, get new drivers side vent, re-paint interior plastics, get jdm tails, get jdm projectors, fix wobbel in shifter *gotta tighten down the bolts*, new sway bar end links for front, get new wheel bearings on all 4 corners, wrap up exhaust and intake piping in heat wrap, re-vamp intake, fix door rust and hatch rust, undercoat car, clean up rear strut bar, get new TRD plate frames, fix paint chips and blemishes, de-badge rear, new front strut bar *probably cusco*, install gauges, buy DCW single pod, paint and install 5th gen mirrors, get new sunroof, re-do headliner

So, the list starts tomorrow....first step stage 3 of my celica. wish me luck

This post has been edited by Valo666: Nov 3, 2007 - 9:21 PM

[Valo666]

got the new headliner in today. It was actually pretty easy and looks amazingly good except for 1 small spot i messed up. I also died my sun visors black again. The best part is...it only cost me $30 for the material and for some good spray adhesive. And as for installing it, it was just puttin the peice in, tucking it up over the front, down the sides and rear, spraying some spray adheasive, smoothing out the sections as i go, pulling the material tight, then cutting away the excess. any ways, heres the pics.



you can see the one small screw up spot on the left.

and sun visor...it needs a few more coats of the dye though.


the headliner is fully black, just the flash makes it gray looking.