Just got my new radio. {installed with pic}, Kenwood KDC-MP635 Options

[cwlevie21]

So it's a Kenwood KDC-MP635.
http://www.kenwoodusa.com/Car_Enter...eiver/KDC-MP635
It was originally around $250, but I got it for $180. Should I pay the $50 for Best Buy to install it or is it not that hard?

This post has been edited by cwlevie21: Nov 9, 2007 - 8:43 AM

[6strngs]

if you buy the wiring kit it's super easy. just pull out your dash pieces and your stock unit. now, if you have an amp, you'll need to disconnect the connecters to it because that's what the wiring harness plugs into (it took me like 2 hours to figure that out! lol) then one you have the wiring kit plugged into that and the wires plugged into the back of your head unit, you just match the like colors together. you can buy some wire butt connectors at radioshack for like $3 and a crimping tool for like $5 and then you just match the blue wires to blue wires, red to red, white to white, etc. and that's it.

best buy's installation price is $50, but they'll charge you for the wiring kit and installation kit anyway so it comes out to like $80-90 anyway.