My 5sfTe project, Photo's are big 56k warning... sorry Options

[1bwilson]

So since I really dont have a set 5sfte post just my "need a little help" post, I figured Id make one aswell.

What I have:

Built 5sfe:
CP pistons - In
3sgte rods - In
crank milled to fit the rods - In
PP'd head - In
Metal head gasket - In
ARP head studs - In

Turbo parts:
3s Manifold, Turbo, Oil lines, Coolent lines - In, In, In, In
DG custom IC piping - In
Ebay intercooler (cant remember the size) - In
Injectors 460cc - In
Walbro fuel pump - In
Greddy Type S bov - In
KO Racing DP - In
DG custom Mid pipe - In
SPark plugs gapped properly - In

Other stuff:
Oil filter - Done
Batt relocated to trunk - In
Devils own WI kit - In
Turbo xs manual boost controller - In
Emanage ultimate - here, waiting on the harness.
Boost gauge - In
EGT Gauge - In
AEM UEGO - In

Im rather suprized I havent had any major set backs yet (knock on wood!). Ive taken my time and set a daily goal up for myself and tried to stick with it. Even when I got ahead I cleaned up and planned the next day out. This way Ive been 80% ahead of myself on ordering small things like nuts and bolts that I missed or didnt have from used parts. Would be 100% but some how the tech's at my local toyota cant order the correct part even if I give them the part #'s.

This post has been edited by 1bwilson: Oct 3, 2008 - 10:37 PM

[99GT]

Updates?!

[1bwilson]

Updates?!

Hehe none yet, I got my second filter in the other day but weve had 3 days straight of rain and I havent been able to get out and put it in. I have to lift the car up and install it from under the car, there just isnt enough room to do it from the bay and my car is way to low to just reach under and feed it up. Hopefully sunday will be better weather and Ill be able to burn some more gas. 1 good thing about the car sitting for a few days before the rain was I was able to watch under the car for any slow leaks and there were none. I really hate the idea of taking my car to a shop for tuning (Just to many people out there I know I cant trust) so Ive been really asking around for a good shop. Alot of them are 45 minutes to a hour away and I want to be certin the car will make the drive down. Id like to hit up a local shop, that way I could keep an eye out at them but nothing around here has a dyno and a good reputation. Im hoping to have a set time Im droping the car off by the end of the week next week. Figuring once everything is set and done, and I can drive the car it will snow hehe .