ST (AT200) to GT4 (ST205) partial convertion, Which bits fit Options

[SteveHall]

I had a bit of a search around but couldn't find an answer.
I've currently got a 97 ST which I'm aiming to get a back end looking like this (With supra spoiler):

with regards to the Skyline-a-like tail lights.
I have two questions
1) I need to get a square, two line reg plate pannel like in the image above, to replace my current, long thin one like in the photo below (Both photos not my car). I've found a breakers yard who will ship me one, but will it fit? It would be nice to know this before I part with cash.



2) I wanted to fill in the ugly seam that the quad convertrs have, but I'm concerned that I'd not be able to change the bulbs, does anyone with these lights know if you can access the bulbs by taking the individual lenses off? Or does the whole unit need to come out?


In addition the the back end, I'm looking to get a gt4 bonnet (hood) and bumper from a breakers yard, I know these fit nicely onto the GT (ST202), but how is the fitmet with the ST (AT200). I know I'll have to extend the bonnet latch.

This post has been edited by SteveHall: Nov 12, 2007 - 8:15 AM

[SteveHall]

1)Do you know where it doesn't fit? i.e the lights, the keyhole, the bumper, the boot?

2)It's hard to see really, but there seem to be some screws on each lens if you zoom right in, I'm going to contact the seller with regards to this one I think.

3) What about the bumper? Is that good as well.

Thanks

This post has been edited by SteveHall: Nov 12, 2007 - 8:53 AM

[BloodyStupidDave...]

1)Do you know where it doesn't fit? i.e the lights, the keyhole, the bumper, the boot?

I think lubu misunderstood. A 2-line (US-style) numberplate will not fit the euro-style recess, but the number plate panels are interchangeable, so you could fit a 2-line numberplate into the new recess once you have change the panel over.

Regarding question #3, I am not aware of any differences between the AT200 and ST202 fender/bonnet/bumper beyond the differences between the ST202 and ST204 (which have different but interchangeable fenders). I would have thought it would be a straight swap just the same as an ST202.


This post has been edited by BloodyStupidDavey: Nov 12, 2007 - 12:28 PM