Misfire when hot, replaced everything I could think of... |
Misfire when hot, replaced everything I could think of... |
Oct 16, 2007 - 4:47 PM |
|
Enthusiast Joined Sep 21, '07 From FL Currently Offline Reputation: 0 (0%) |
OK, been chasing a misfire for quite some time. The car runs great first thing in the AM but misfires once normal operating temp is reached. Misfires at idle and while driving. First, I have replaced all fuel and ignition components and all vacuum lines. I decarbonized the combustion chamber (MOPAR CC Cleaner, good stuff!). I have replaced the MAP sensor, O2 sensor, and some various wires that looked corroded. Stock 5s-fe.
The engine bay seems to be getting extremley hot! (but not overheating). Yesterday I pulled the plugs to see if they show any evident signs of wear and I was confused by what I saw. The firing end looked great (brown to grayish color), however the insulator on top of the plug was brown and blistered (burnt)?! Anyone ever see this? They are NGK plugs with the factory heat range. Also (not sure if this has to do with the misfire) but every now and then I hear a pop come from my gas tank. Is the "pop" just releasing pressure from the tank? Is it supposed to do that? Sorry so long, I am just truly stumped!! List of parts replaced: Fuel Pump, Filter, Pressure Reg, Charcoal Canister, EGR Valve, and injectors Brand new distributor, wires, plugs, igniter, O2 sensor, MAP sensor, and even the ECU! Could this be a bad cat causing the heat? Cracked head? Thanks for input... This post has been edited by cv7713: Nov 9, 2007 - 11:21 AM |
Nov 15, 2007 - 11:09 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE OK, no vac leak or exhaust leak. how did you come to that conclusion ? -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: November 30th, 2024 - 9:39 PM |