Problem with my clutch |
Problem with my clutch |
Nov 16, 2007 - 12:26 AM |
|
Enthusiast Joined Nov 4, '07 From utah Currently Offline Reputation: 0 (0%) |
My car will bot go into any of the gears. A couple of days ago it started getting harder and harder to put in gear. I had to push it into gear. Now It refuses to go in gear. Is my transmission bad or my clutch or the slave cylinder in my clutch? Is it an easy or cheap fix?
I already bled the fluid and replaced it. It takes Dot 3 brake fluid. The old fluid was dirty. There's more info. -------------------- sig removed for size and content.
|
Nov 17, 2007 - 6:08 PM |
|
Enthusiast Joined Jun 10, '07 From Riverside, CA Currently Offline Reputation: 4 (100%) |
I had this issue with mine when I first got it, as well as with a couple other cars. The fix for mine was to change out the slave cylinder. If not that then check the valve on the slave/master cylinders to make sure it makes that seal completely so that way you bleeding the brakes isn't a complete waste of time. I had a car before where one of those valves went bad. Just a thought though......
-------------------- |
Lo-Fi Version | Time is now: December 1st, 2024 - 6:54 PM |