 cams are here, webcams - pics and dyno pics yay |
 Sep 28, 2007 - 10:36 PM
|
 
|
 Enthusiast  Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%)  |
pics
     I got the 294 grind, which is an overall preformance grind. The other grind they do (the 101) is more for non-stock internals, lower compression, ect., not really what is best for my situation. the plan First I need to dyno the GT for the control. Then install, re-shim the valves, new valve seals since we're in there, and then dyno again with some tuning. Then compare the results. From what I understand (on a 5th gen 5s) this should fatten my power band pretty nice. The mr2 guys get about +20 hp to the wheels with these. Now if I can get at least that with these, it should make a big difference when I turbo... comments are welcome. This post has been edited by Batman722: Dec 1, 2007 - 11:05 PM -------------------- |
 |
Replies
|
Nov 19, 2007 - 10:13 AM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
installed. After a couple of set backs with some minor issues it is complete.
They are amazing !!! These cams make a huge difference in the way the car accelerates. My power band is way to the right more (higher PRMs). The car PULLS unitl redline, no dropoff !!! I can feel the torque hold better in the higher RPMs too. These are dabomb.com, no jive. next is the dyno. Hopefully this week we can get in, I will keep you all posted with results. -------------------- |
Posts in this topic
Batman722 cams are here Sep 28, 2007 - 10:36 PM
Deezz_Nuttz very nice, keep us posted Sep 29, 2007 - 12:57 AM Rayme Is there a link to those MR2 guy's dyno with t... Sep 29, 2007 - 9:06 AM Black2na dustin those looks sexy has all get out nice job i... Sep 29, 2007 - 9:15 AM blckcelica95 where you get the them ,and how much? becuase i... Sep 29, 2007 - 9:26 AM jcbass7 awesome dustin, those look great, where are you go... Sep 29, 2007 - 9:59 AM x_itchy_b_x wow, this will be cool. new power band woo woo... Sep 29, 2007 - 10:20 AM Defgeph Very nice. I can't wait to see the results. Sep 29, 2007 - 10:35 AM presure2 hehe SWEEEET D cant wait to get these installed an... Sep 29, 2007 - 11:28 AM alltracman78 Dustin, get some assembly lube before you put thos... Sep 29, 2007 - 8:57 PM Batman722 here's a side by side comparison with stock ca... Oct 1, 2007 - 9:13 PM lagos mad props for being a pioneer with these. Oct 1, 2007 - 9:20 PM x_itchy_b_x less lift, more duration. sweet. Oct 1, 2007 - 9:29 PM
6strngs QUOTE(x_itchy_b_x @ Oct 1, 2007 - 7... Oct 2, 2007 - 6:59 PM alltracman78 QUOTE(6strngs @ Oct 2, 2007 - 6:59 P... Oct 4, 2007 - 5:39 PM Defgeph Thats freaking sweet man. I can't wait to see ... Oct 2, 2007 - 1:20 AM NuclearHappineS it looks like more lift, look at the base circle o... Oct 4, 2007 - 4:45 PM 94celicadude wow..looks sweet! let us know if these are wor... Oct 10, 2007 - 2:20 PM x_itchy_b_x I assumed it was less lift only because I didnt re... Oct 10, 2007 - 2:39 PM bdog_v Any updates??? Oct 17, 2007 - 5:53 PM Batman722 we're installing on Nov 10-11ish. I am going t... Oct 17, 2007 - 7:15 PM jcbass7 Nice work T-bone!
i might have to come down ... Nov 19, 2007 - 10:19 AM jdg371 Can't wait for the dyno! Nov 19, 2007 - 10:50 AM jcbass7 oh yea... pics of the install!?!? I need a... Nov 19, 2007 - 10:54 AM 6strngs mmm, I want some on my car. I wonder if I'd br... Nov 19, 2007 - 5:39 PM presure2 QUOTE(6strngs @ Nov 19, 2007 - 6:39 ... Nov 19, 2007 - 9:04 PM lagos cant wait for the dyno results. post up some insta... Nov 19, 2007 - 9:54 PM Bitter hmm wonder how they play with the corolla header? Nov 19, 2007 - 10:29 PM bdog_v Very interesting I can't wait to see the specs... Nov 27, 2007 - 11:07 PM Batman722 with a 7a, well we'll see in a few weeks
as ... Nov 27, 2007 - 11:12 PM Batman722 ok here's the pics.
the cams
and my no... Dec 1, 2007 - 11:23 PM presure2 QUOTE(Batman722 @ Dec 2, 2007 - 12:2... Dec 2, 2007 - 9:29 AM 6strngs QUOTE(presure2 @ Dec 2, 2007 - 6:29 ... Dec 3, 2007 - 1:23 AM Defgeph AWESOME. Thats great stuff right there. Dec 1, 2007 - 11:27 PM lagos VERY interesting results, Dustin! The fuel cur... Dec 1, 2007 - 11:46 PM Batman722 yea Art for that run I had no corrections until ab... Dec 1, 2007 - 11:55 PM Rusty hmm, how much work you done on it (intake & f... Dec 2, 2007 - 12:21 AM 6strngs how does the low end feel now though? it looks lik... Dec 2, 2007 - 4:01 AM presure2 QUOTE(6strngs @ Dec 2, 2007 - 5:01 A... Dec 2, 2007 - 7:29 AM Hanyo wow the power difference after 4000 rpm is impress... Dec 2, 2007 - 6:30 AM stetsonaw very awesome... so did you send your cams off to g... Dec 2, 2007 - 7:28 AM Kadett QUOTE(Rusty @ Dec 2, 2007 - 6:21 AM)... Dec 2, 2007 - 8:12 AM Rayme thats great, not much top HP gain but you gain mor... Dec 2, 2007 - 9:38 AM lagos QUOTE(Rayme @ Dec 2, 2007 - 9:38 AM)... Dec 2, 2007 - 1:40 PM Rayme QUOTE(lagos @ Dec 2, 2007 - 2:40 PM)... Dec 2, 2007 - 9:49 PM jcbass7 nice stuff dustin!
notice the difference at... Dec 2, 2007 - 8:07 PM Rusty QUOTELittle bit unfair to compare a 3S-GE to a 5S-... Dec 3, 2007 - 12:27 AM jcbass7 650 for an addition to the power curve like that, ... Dec 3, 2007 - 9:53 AM Batman722 ^^ that's a great comparison there Manny. That... Dec 3, 2007 - 11:02 AM x_itchy_b_x turn the boost up! nice gains man. thats some... Dec 3, 2007 - 12:08 PM presure2 6strings:
yup, ~ 650 for the pair.
in comparison, ... Dec 3, 2007 - 12:10 PM 6strngs QUOTE(presure2 @ Dec 3, 2007 - 9:10 ... Dec 4, 2007 - 12:32 AM presure2 QUOTE(6strngs @ Dec 4, 2007 - 1:32 A... Dec 4, 2007 - 6:18 AM yodaman87 QUOTE(presure2 @ Dec 4, 2007 - 6:18 ... Dec 17, 2007 - 12:02 AM MyFreeCamry [/quote]
ive sent my cams out to goeff at colt cam... Jan 5, 2008 - 2:54 AM 6G96GT [/quote]
ive sent my cams out to goeff at colt cam... Apr 2, 2008 - 1:33 PM jesterwr217 are there any for the 7a? Dec 3, 2007 - 12:21 PM LewFX hurley is getting some for her 7a Dec 3, 2007 - 12:44 PM stetsonaw presure2, you say there are some for a 3s. where ... Dec 4, 2007 - 12:06 AM lagos QUOTE(stetsonaw @ Dec 4, 2007 - 12:0... Dec 4, 2007 - 1:04 AM Rusty what HP gain are we talking with cams in a 3S-GE? ... Dec 4, 2007 - 1:10 AM elvasoshexai so how do these performance cams affect driveabili... Dec 4, 2007 - 1:26 PM presure2 QUOTE(elvasoshexai @ Dec 4, 2007 - 2... Dec 4, 2007 - 4:45 PM Batman722 QUOTE(presure2 @ Dec 4, 2007 - 4:45 ... Dec 4, 2007 - 11:40 PM frosty Very nice, I really wish you would have gotten a b... Dec 11, 2007 - 11:11 AM 6strngs any news on the colt cams for 5sfte's? Mar 31, 2008 - 9:14 AM bccentaur3 X2, you guys never got back to us about the cams f... Mar 31, 2008 - 4:20 PM presure2 sorry guys, i havent had the cash for them.
we kn... Apr 1, 2008 - 11:21 AM 6strngs I just looked at web cams site, they now list 7 di... Apr 2, 2008 - 12:46 AM bccentaur3 I just feel that if you don't intend on upgrad... Apr 2, 2008 - 10:35 AM presure2 QUOTE(bccentaur3 @ Apr 2, 2008 - 11... Apr 2, 2008 - 5:54 PM bccentaur3 Hey Dustin get back to us on how the car idles. Apr 2, 2008 - 7:26 PM Batman722 QUOTE(frosty @ Dec 11, 2007 - 12:11 ... Apr 2, 2008 - 10:54 PM darthripley QUOTE(bccentaur3 @ Apr 2, 2008 - 10... Apr 5, 2008 - 8:20 PM Euphoria god I'd love to have this done but how could I... Sep 10, 2008 - 5:17 AM RavenAegis45 they definitely look pretty nice. but I hear alter... Sep 11, 2008 - 12:51 AM Kwanza26 QUOTE (RavenAegis45 @ Sep 11, 2008 - 6... Sep 19, 2008 - 7:52 PM CelicaGTS94 ok so what all is needed to get these cams up and ... Sep 19, 2008 - 9:47 AM Kwanza26 QUOTE (CelicaGTS94 @ Sep 19, 2008 - 3... Sep 19, 2008 - 7:55 PM |
10 User(s) are reading this topic (10 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 1:09 PM |