![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 26, '07 From CP 518 Currently Offline Reputation: 0 (0%) ![]() |
IF you had 4 grand and wanted to make your celi faster/look nicer what would you buy
-------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
QUOTE I would change out the silvertop to a blacktop 4age and do a port and polish to the head. Then replace the factory cams with Toda intake/exhaust cams. Replace the pistons, valve train, and run open ITB's on the 20v blacktop. Followed by sending another 20v ecu to techtom (TOM's RACING) and have them chip the ecu and fine tune it to the upgrades I have done to the engine. Yeah, that's what I would do. Increase the HP and make the car more fun to drive by hearing the ITB's in higher RPM's. The problem is though is a dyno to see the new engine HP output. Silvertop has more torque anyways. Blacktop is only rated 110tq and only 10hp more than a Silvertop. I would put in some Toda cams. Whatever size that will retain the VVT, then some cam gears, Toda valve springs & retainers, maybe some headwork. In the end, it wouldn't end up being much. Might hit 160whp... -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() ![]() |
Lo-Fi Version | Time is now: February 17th, 2025 - 9:49 AM |