 !!5sfte!!, the second coming! |
 Nov 17, 2007 - 3:13 PM
|
 
|
 Enthusiast  Joined May 12, '06 From Wilmington, NC Currently Offline Reputation: 45 (100%)  |
yep, you heard me. I'm coming back to the 5sfte community. Doing things a little different this time around, here's what I can remember so far that I'm doing differently:
Genuine HKS BOV, the new 2007 design Got my injectors cleaned and flow tested at witchhunter. They were is poor condition before and are great now! Going with a SAFCII instead of a neo. I got it for about $75 cheaper, and it measures knock. I was gonna get a greddy emanage ultimate, but I don't have a laptop to tune it with and it just looked too complicated for me to figure out how to tune it by myself, so maybe I'll upgrade later. Got a custom stailness braided oil feed and drain line kit made specifically for my 5sfte. I just gotta weld a fitting onto my oil pan but I'm having a hard time finding someone willing to do it. I'm fixing my radiator fan which was broken before. the motor fell out of the blade cause it was hooked up wrong I'm using a regular sized radiator instead of the koyo, for a little more engine bay room I'm relocating the battery to the trunk and I'm cutting my IC piping down a lot for a cleaner install, might even paint them like LewFX that's all I can think of right now, pictures to come. hope to be running by the end of the week  after 6 months of down time!--------------------  94 GT - Sold -------- 69 Pontiac Lemans - Sold 88 Alltrac - Sold ---- 04 WRX - Sold 00 GT-S - Sold ------ 91 Miata - project/drift car 95 GT - Sold -------- 96 GT - New Daily Drive |
 |
Replies
|
Dec 4, 2007 - 6:20 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
DO NOT USE RTV ON ANY PART OF YOUR TURBO, AND DO NOT RUN IT OIL COOLED ONLY.
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Dec 4, 2007 - 5:31 PM
|
|
|
Enthusiast Joined May 12, '06 From Wilmington, NC Currently Offline Reputation: 45 (100%) |
QUOTE(presure2 @ Dec 4, 2007 - 3:20 AM) [snapback]619499[/snapback] DO NOT USE RTV ON ANY PART OF YOUR TURBO, AND DO NOT RUN IT OIL COOLED ONLY. perhaps not the nicest way to put it, but at least this post was helpful. it doesn't matter anyway, I was able to get a gasket from Calijeff so I'm about to go install that and hope that it doesn't leak now. then hopefully get my other two gauges working and a couple other small things. -------------------- 94 GT - Sold -------- 69 Pontiac Lemans - Sold 88 Alltrac - Sold ---- 04 WRX - Sold 00 GT-S - Sold ------ 91 Miata - project/drift car 95 GT - Sold -------- 96 GT - New Daily Drive |
Posts in this topic
6strngs !!5sfte!! Nov 17, 2007 - 3:13 PM
ecaddiction Pics when you get done!! Glad you stuck wi... Nov 17, 2007 - 7:54 PM bccentaur3 Forget the pics, get some vids with the 5sfte in a... Nov 17, 2007 - 8:00 PM
6strngs QUOTE(bccentaur3 @ Nov 17, 2007 - 5... Nov 17, 2007 - 8:09 PM bccentaur3 for VIDS. I know what you mean about being anxious... Nov 17, 2007 - 8:13 PM 1bwilson Welcome back to team 5sfte! Nov 17, 2007 - 8:56 PM 6strngs just finished installing the fuel pump, and I took... Nov 17, 2007 - 10:16 PM bccentaur3 So what was up with your other oil filter relocati... Nov 17, 2007 - 11:02 PM 6strngs cause I installed it wrong and the rubber O-ring w... Nov 17, 2007 - 11:08 PM bccentaur3 you don't have to go stainless do you? Nov 17, 2007 - 11:09 PM 6strngs QUOTE(bccentaur3 @ Nov 17, 2007 - 8... Nov 18, 2007 - 12:46 AM bccentaur3 LOL. You know what they say. 3rd times the charm. Nov 18, 2007 - 12:48 AM 6strngs went to a pick'n'pull today and was surpri... Nov 19, 2007 - 1:37 AM elvasoshexai when i saw pics of presure2 and shin's car, th... Nov 19, 2007 - 1:40 AM 6strngs QUOTE(elvasoshexai @ Nov 18, 2007 - 10... Nov 19, 2007 - 2:03 AM 6strngs you asked for it, you got it! I just found I c... Nov 19, 2007 - 3:06 AM presure2 what size is that return line? Nov 19, 2007 - 6:33 AM bccentaur3 Weird bends and angles, but hey it works. Nov 19, 2007 - 3:20 PM 6strngs QUOTE(bccentaur3 @ Nov 19, 2007 - 12... Nov 19, 2007 - 5:36 PM presure2 QUOTE(6strngs @ Nov 19, 2007 - 6:36 ... Nov 19, 2007 - 8:59 PM 6strngs QUOTE(presure2 @ Nov 19, 2007 - 5:59... Nov 19, 2007 - 11:43 PM presure2 QUOTE(6strngs @ Nov 20, 2007 - 12:43... Nov 21, 2007 - 6:39 AM OOBE [/quote]
guy, are you thick headed.
the person who... Nov 29, 2007 - 12:56 AM LewFX from my tuner guy, he said t-clamps suck...theres ... Nov 19, 2007 - 5:55 PM 6strngs QUOTE(LewFX @ Nov 19, 2007 - 2:55 PM... Nov 19, 2007 - 8:47 PM LewFX referring to t-clamps for ic piping Nov 19, 2007 - 8:58 PM celicast3sgte GIT-R-DONE! Nov 20, 2007 - 7:53 PM 6strngs well, took the line to the shop and he looked at i... Nov 20, 2007 - 8:32 PM 6strngs having a couple days off from school, and a day of... Nov 22, 2007 - 8:42 PM jcaron9gt4 Where is your coolant lines for your turbo coming ... Nov 22, 2007 - 8:57 PM 6strngs QUOTE(jcaron9gt4 @ Nov 22, 2007 - 5... Nov 22, 2007 - 10:22 PM celicast3sgte nice work man, looks good Nov 24, 2007 - 12:51 PM 6strngs here's two pics to show the current state:
... Nov 24, 2007 - 5:15 PM CaliJeff what did u use to clean off all those surfaces ? e... Nov 27, 2007 - 1:09 PM 6strngs QUOTE(CaliJeff @ Nov 27, 2007 - 10:0... Nov 27, 2007 - 5:59 PM jcaron9gt4 good to hear man...glad you didnt give up after yo... Nov 27, 2007 - 6:02 PM 6strngs I plan to get an early start tomorrow morning and ... Nov 29, 2007 - 1:46 AM presure2 QUOTE(6strngs @ Nov 29, 2007 - 2:46 ... Nov 29, 2007 - 6:39 AM celicast3sgte QUOTE(presure2 @ Nov 29, 2007 - 3:39... Nov 29, 2007 - 9:11 PM 6strngs QUOTE(celicast3sgte @ Nov 29, 2007 - 6... Nov 30, 2007 - 3:02 AM OOBE He is not bashing him. It just gets on his nerves ... Nov 29, 2007 - 9:37 PM celicaST QUOTE(OOBE @ Nov 29, 2007 - 7:37 PM)... Nov 29, 2007 - 9:53 PM celicast3sgte hes called him a meatball and something else so fa... Nov 29, 2007 - 9:55 PM OOBE You need thick skin on the Internet. Just because ... Nov 29, 2007 - 10:22 PM presure2 i called him a meatball, cause ive said to HIM SPE... Nov 30, 2007 - 6:26 AM LewFX how did you hook your safc up...95% of ppl dont do... Nov 30, 2007 - 1:14 PM 6strngs QUOTE(LewFX @ Nov 30, 2007 - 10:14 A... Nov 30, 2007 - 3:06 PM presure2 QUOTE(6strngs @ Nov 30, 2007 - 4:06 ... Nov 30, 2007 - 5:19 PM OOBE *grabs popcorn* Nov 30, 2007 - 6:03 PM Supersprynt *grabs meatball* Nov 30, 2007 - 6:15 PM lagos The number one reason why celica turbo kit project... Nov 30, 2007 - 6:43 PM 6strngs Well, the car runs! When we had started it bef... Dec 1, 2007 - 4:33 AM cHinaman727 amazing! Half a month, little arguing, little ... Dec 1, 2007 - 11:06 AM 6strngs QUOTE(cHinaman727 @ Dec 1, 2007 - 8... Dec 1, 2007 - 11:16 AM bccentaur3 QUOTE(6strngs @ Dec 1, 2007 - 10:16 ... Dec 1, 2007 - 12:34 PM 6strngs QUOTE(bccentaur3 @ Dec 1, 2007 - 9:3... Dec 1, 2007 - 4:21 PM elvasoshexai wait... i thought a bov ISN'T supposed to go o... Dec 1, 2007 - 12:59 PM bccentaur3 Technically if you're reving you're buildi... Dec 1, 2007 - 1:02 PM celicast3sgte the HKS bov reacts way different from your typical... Dec 1, 2007 - 1:52 PM 6strngs two piccys for you. one was taken on thursday befo... Dec 2, 2007 - 4:04 AM 6strngs ok, got everything hooked up. for some reason my w... Dec 4, 2007 - 12:46 AM LewFX i bought my gasket from a seller on ebay, 9 bucks ... Dec 4, 2007 - 1:00 AM lagos QUOTEI was wondering though, would it hurt anythin... Dec 4, 2007 - 1:12 AM 6strngs QUOTE(lagos @ Dec 3, 2007 - 10:12 PM... Dec 4, 2007 - 1:59 AM OOBE QUOTE(lagos @ Dec 4, 2007 - 12:12 AM... Dec 4, 2007 - 2:57 AM Batman722 On your last set up you had 2-3 bad/blown turbos, ... Dec 4, 2007 - 2:10 AM Supersprynt I'm pretty sure the caps were there just for e... Dec 4, 2007 - 5:42 PM presure2 QUOTE(Supersprynt @ Dec 4, 2007 - 6... Dec 4, 2007 - 5:51 PM jcaron9gt4 manny wouldnt do something liek that Dec 4, 2007 - 6:10 PM 6strngs Coolant leak is fixed, but now the car leaks oil, ... Dec 4, 2007 - 8:39 PM LewFX i know that feeling, almost feel the same way righ... Dec 4, 2007 - 8:40 PM lagos QUOTE(6strngs @ Dec 4, 2007 - 8:39 P... Dec 4, 2007 - 8:44 PM 6strngs QUOTE(lagos @ Dec 4, 2007 - 5:44 PM)... Dec 4, 2007 - 8:55 PM LewFX take an old o-ring off your old injectors Dec 4, 2007 - 8:48 PM LewFX rcengineering told me to put a dab of oil on the s... Dec 4, 2007 - 9:06 PM OOBE I always use a bit of oil from the dipstick to lub... Dec 5, 2007 - 1:28 AM 6strngs QUOTE(OOBE @ Dec 4, 2007 - 10:28 PM)... Dec 5, 2007 - 2:04 AM OOBE Yeah, it's hard, but it's not hard to chec... Dec 5, 2007 - 3:36 AM 6strngs QUOTE(OOBE @ Dec 5, 2007 - 12:36 AM)... Dec 5, 2007 - 5:49 PM OOBE This is what I'm atalking about. Some of you k... Dec 5, 2007 - 3:49 AM OOBE " If there are any issues down the road I wil... Dec 5, 2007 - 4:15 AM Supersprynt And that's all I got to say about that.
Use t... Dec 5, 2007 - 8:51 AM Batman722 oobie, where do you suggest tapping coolant from ? Dec 5, 2007 - 8:32 PM OOBE Apology for what? For quoting what he wrote and sp... Dec 5, 2007 - 10:41 PM 6strngs QUOTE(OOBE @ Dec 5, 2007 - 7:41 PM) ... Dec 6, 2007 - 1:03 AM CaliJeff oobe, u may have completed ur 5sfte project succes... Dec 5, 2007 - 8:37 PM celicast3sgte heheh...
anyways hope it works out for ya man, do... Dec 6, 2007 - 11:09 AM zero07 Hey oobe, i know you said you would stay out of th... Dec 6, 2007 - 12:56 PM lagos QUOTE"DO NOT APPLY ENGINE OIL, GEAR OIL, TRAN... Dec 6, 2007 - 1:11 PM Supersprynt I think a lot of people here are spoiled because y... Dec 6, 2007 - 1:16 PM 99GT Everyone is just trying to help out. I think what... Dec 6, 2007 - 4:12 PM 6strngs So, on tuesday I pulled the injector and noticed t... Dec 6, 2007 - 5:31 PM jcaron9gt4 push it into the garage...and get this thing done... Dec 6, 2007 - 5:58 PM presure2 QUOTE(jcaron9gt4 @ Dec 6, 2007 - 6:5... Dec 6, 2007 - 6:16 PM 6strngs QUOTE(presure2 @ Dec 6, 2007 - 3:16 ... Dec 7, 2007 - 2:03 AM 6strngs well, I put it back together today. I got fed-up w... Dec 8, 2007 - 2:03 AM presure2 QUOTE(6strngs @ Dec 8, 2007 - 3:03 A... Dec 8, 2007 - 7:12 AM lagos you can use zip ties on the vac lines. Dec 8, 2007 - 2:56 AM |
17 User(s) are reading this topic (17 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 10:40 PM |