BOV. |
BOV. |
Dec 11, 2007 - 5:41 PM |
|
Enthusiast Joined Sep 28, '07 From new jersey Currently Offline Reputation: 1 (100%) |
hey i need a little help figureing out what line goes to my BOV and what line goes to my FPR im not using an FMU im using bigger injectors...and the 7afte bible onli shows u the lines to use if ur using an FMU so help i need to kno what line goes to the BOV and what line goes to the FMU?
|
Dec 11, 2007 - 6:58 PM |
|
Enthusiast Joined Sep 28, '07 From new jersey Currently Offline Reputation: 1 (100%) |
ok so i can use any line from my intake manifold on my BOV? cuz thts not what the 7afte bible saids.
this what it saids(For the FMU, install the line coming off the fuel rail on the passenger side. Remove that line, then install one new line from the FPR on the rail to the inlet part of your FMU then from the FMU to the outlet line for the gas. On top of the FMU is a little hose you'll "T" that in the manifold and onto the BOV. (Look at the picture for reference) This post has been edited by pabel89: Dec 11, 2007 - 7:00 PM |
Lo-Fi Version | Time is now: November 25th, 2024 - 2:31 AM |