 Polk subs and kicker amp, wat yall think of this setup? |
 Nov 7, 2007 - 1:34 AM
|
 
|
 Enthusiast  Joined Feb 28, '07 Currently Offline Reputation: 1 (100%)  |
Well i thought id make my own custom box but now im thinking not,what do u guys think of these,there reviews are great,but id need to get a big amp to power them.Concerns,questions,comments?
 http://www.crutchfield.com/App/Product/Ite...2122&tp=112 Details: *ported enclosure with two 12" db Series subwoofers *3/4" MDF construction with front-panel ABS trim * polypropylene woofers with Santoprene rubber surrounds * 2-ohm mono impedance (1 set of heavy-duty binding posts) * Power Port venting technology * frequency response: 27-200 Hz * power handling: 750 watts RMS (1,500 watts peak power)<<<<<<<<<<< * sensitivity: 103 dB * 34-1/4"W x 16-1/4"H x 17-1/4"D1 x 13-1/4"D2 * warranty: 1 year +  http://www.crutchfield.com/App/Product/Ite...7501&tp=115 # mono subwoofer amplifier # 375 watts RMS x 1 at 4 ohms (750 watts x 1 at 2 ohms) # variable low-pass filter (50-200 Hz at 24 dB per octave) # variable bass boost (0-18 dB at 40 Hz) # subsonic filter (12 dB at 25 Hz) # wired remote bass level control # Class D design # CEA-2006 compliant # speaker-level inputs # preamp outputs # fuse rating: 40A x 2 # 4-gauge power and ground leads with 80-amp fuse recommended — wiring and hardware not included with amplifier # 14-11/16"W x 2-5/16"H x 9-5/8"D # warranty: 2 years This post has been edited by CelicaST_CALI: Nov 12, 2007 - 10:23 PM -------------------- BANNED. for life, you moron.
|
 |
Replies
|
Dec 15, 2007 - 11:43 PM
|
|
|
Enthusiast Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) |
BUMP
-------------------- BANNED. for life, you moron.
|
Posts in this topic
CelicaST_CALI Polk subs and kicker amp Nov 7, 2007 - 1:34 AM
spolski07 sounds like a great sub...
heard a lot of good thi... Nov 7, 2007 - 2:14 AM 94celigts MTX Cheaper and same quality. Polks are very nice ... Nov 7, 2007 - 10:17 AM tim86 they look nice... ive also heard great things abou... Nov 7, 2007 - 11:25 AM CelicaST_CALI bump Nov 10, 2007 - 6:09 PM CelicaST_CALI im thinking of powering them with this,good?:
http... Nov 11, 2007 - 5:29 PM spolski07 QUOTE(CelicaST_CALI @ Nov 11, 2007 - 5... Nov 11, 2007 - 6:54 PM BLINKYxMUNKEY I like Polk. Nov 11, 2007 - 7:48 PM CelicaST_CALI wow thats cool blinky^^^^^ wat subs and amps are t... Nov 11, 2007 - 7:57 PM BLINKYxMUNKEY Two 12in. Polk MM2124 series running off the Polk... Nov 11, 2007 - 8:54 PM CelicaST_CALI sounds loud^^^wat do u think of the wiring of polk... Nov 11, 2007 - 9:49 PM DaCCelica94 i was lookin at the pic of that kenwood amp and th... Nov 11, 2007 - 10:09 PM BLINKYxMUNKEY There are no problems with running 2 subs off of o... Nov 11, 2007 - 10:13 PM DaCCelica94 what i meant was you wont get as much power to bot... Nov 11, 2007 - 10:17 PM CelicaST_CALI ya i thought of that,but thats around 600rms per s... Nov 11, 2007 - 10:27 PM spolski07 if you wire them correctly you will actually get m... Nov 12, 2007 - 12:58 AM CelicaST_CALI wat do u mean wire right,just buy high gauge wire?... Nov 12, 2007 - 1:08 AM CelicaST_CALI ok well i realized that these subs are 750rms TOGE... Nov 12, 2007 - 9:29 PM cHinaman727 my friend just got two 1200 w 12's from kenwoo... Nov 12, 2007 - 10:29 PM CelicaST_CALI and wat does that have to do with this....that luc... Nov 12, 2007 - 10:52 PM 97-SX If you wire 2 2ohm subs in parallel you will get a... Nov 13, 2007 - 12:40 AM CelicaST_CALI u got a pm..im pretty sure they are 1ohm a piece..... Nov 13, 2007 - 12:43 AM 97-SX They're 2 ohm SVC (single voice coil)
Basical... Nov 13, 2007 - 5:17 AM spolski07 i know the Fosgate P1000-1BD for a fact is 1 ohm s... Nov 13, 2007 - 11:23 AM CelicaST_CALI ya BUT on teh specs the read 750 rms TOGETHER,and ... Nov 13, 2007 - 8:52 PM 97-SX Fair enough. That sounds like a good plan. I'd... Nov 14, 2007 - 2:35 AM CelicaST_CALI ok yes i have read over 50 reviews for this sub an... Nov 14, 2007 - 7:32 PM Culpable04 off topic but I think is funny how you're all ... Nov 14, 2007 - 7:53 PM CelicaST_CALI are u kidding me,200 watts peak power,im looking f... Nov 14, 2007 - 7:56 PM joehernandez i have heard lots of good things from polk
but im ... Nov 15, 2007 - 5:03 PM CelicaST_CALI those look nice Nov 20, 2007 - 8:28 PM CelicaST_CALI BUMP Dec 3, 2007 - 12:31 PM trdproven I am a no nonsense kind of person when it comes to... Dec 10, 2007 - 8:52 AM CelicaST_CALI and how does this have anything to do with this th... Dec 10, 2007 - 11:00 PM joehernandez QUOTE(CelicaST_CALI @ Dec 10, 2007 - 11... Dec 11, 2007 - 2:55 AM
CelicaST_CALI QUOTE(joehernandez @ Dec 10, 2007 - 11... Dec 11, 2007 - 8:27 PM tim86 He needs to pick something and see what he likes a... Dec 11, 2007 - 9:43 AM CelicaST_CALI anyone.... Dec 17, 2007 - 9:50 AM Culpable04 I have a ZX kicker amp, but mine is 400 watts, the... Dec 17, 2007 - 10:54 AM CelicaST_CALI ya i did thanks for the help Dec 17, 2007 - 9:58 PM itssteve well i think that you could have gotten a lot more... Dec 18, 2007 - 12:17 AM CelicaST_CALI havent bought anything yet Dec 18, 2007 - 1:02 AM massbrandon I think those subs sound OK. Personally I think yo... Dec 23, 2007 - 5:15 PM itssteve ^^^ i feel the same way, i mean it is only about 6... Dec 23, 2007 - 6:59 PM CelicaST_CALI ya but that box is specially made for those subs a... Dec 24, 2007 - 12:26 AM itssteve i can almost garenty that the box is not perfect i... Dec 24, 2007 - 1:22 AM CelicaST_CALI well over 50 ppl out of 70 that had crappier amps ... Dec 24, 2007 - 1:35 AM itssteve QUOTE(CelicaST_CALI @ Dec 24, 2007 - 1... Dec 26, 2007 - 2:05 AM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 4:58 PM |