FS: Lots of Misc Parts for Toyota, Turbo, Exhaust, Intake / Interc, Updated 22/10/2008 Options

[elvasoshexai]

Got a bunch of parts laying around that I want to get rid of.

Toyota Specific Parts:
1) 1 Brand New (Sealed) 5SFE ACT Release Bearing (Part #RB442, this is basically an OEM part) - $30

2) 1 Used OEM 2nd gen 3SGTE CT26/CT20B Turbo to Downpipe Gasket - $5

3) 1 Used OEM 2nd gen 3SGTE CT26/CT20B Turbo to Exhaust Manifold Gasket - $5

4) 2 x New OEM 2nd gen 3SGTE CT26/CT20B Catalytic Converter to Exhaust/Elbow to Catalytic Converter Gasket - $5 Each ($7 for both)

5) 1 Used OEM 5SFE Heatshield - $15

6) 1 Used OEM 5SFE Exhaust Manifold + Stock Downpipe/Elbow/Cat or whatever that piece is connecting to it - $30

7) 1 Used OEM 5SFE Cruise Control Cover - $5

8) 1 Used OEM 5SFE Air Filter Box + Tube connecting to TB + Tube on bottom of airbox + the 3rd piece that connects to that- $20

9) 1 Used OEM 2nd gen 3SGTE Oil Return Hardline w/ rubber hose and clamps - $15

10) 1 set (2) of New OEM clamps for Rubber Hose of 3SGTE Oil Return Line - $1.50 Each ($2 for both)

11) 1 Used OEM 5SFE MAP Sensor - $30

12) 1 set (4) of Used OEM 5SFE Fuel Injectors - $40

Exhaust Parts:
13) 1 Vibrant 2.5" Mandrel Bent Stainless Steel U-bend (Radius is about 4", from where it starts to bend, one leg is about 6" the other is 7") - $50

14) 1 Brand New (Never Opened) Vibrant 2.5" Stainless Steel Straight Pipe (5 Feet long) - $70

15) 1 previously cut Vibrant 2.5" Stainless Steel Straight Pipe (About 2'3" left) - $30

Intake / Intercooler Parts:
17) 8 Brand New 2.25" Polished Aluminum Straight Pipes w/ Rolled Ends (Each about 18" length) - $10 Each ($70 for all 8)

18) 6 x High Temp Silicone 4-ply 2.25" Black Straight Silicone Coupler (3") - $7 Each ($35 for all 6)

19) 1 x High Temp Silicone 4-ply 2.75" Black Straight Silicone Coupler (3") - $7

20) 1 x 2.25" Black Straight Silicone Coupler (slightly < 4") - $5

21) 1 x 2.25" Black Straight Silicone Coupler (cut at an angle, slightly < 3" to 3") - $3

22) 10 x 2.25" Stainless Steel T-Bolt Clamps - $3 Each ($25 for all 10)

23) 1 x 2.75" Stainless Steel T-Bolt Clamp - $3

Oil Filter Relocation Parts:
24) 1 Earl's Perform-O-Flex Braided Stainless Steel -10AN Hose (about 6 Feet in length) - $40

25) 2 Brand New Earl's Aluminum Swivel-Seal Straight -10AN to -10AN Hose Ends - $10 Each ($15 for 2)

Exterior Body Parts:
26) 1 Brand New pair of AeroCatch Plus Flush Hood Pins - $50

-------------------------------------------
-All prices in CAD and OBO
-Shipping Extra
-PM me if interested

This post has been edited by elvasoshexai: Oct 31, 2008 - 9:54 PM

[Valo666]

ill take the turns off ur hands if you want. I can pick em up too sometime between the 23rd and 29th.