6G Celicas Forums

Welcome Guest ( Log In | Register )

> Crickets in my engine....
post Dec 19, 2007 - 3:06 PM
+Quote Post
dabazied

Enthusiast
***
Joined Jun 10, '07
From Riverside, CA
Currently Offline

Reputation: 4 (100%)




Well here is the prob with my engine at the moment: sounds like there are crickets chirping in my engine. When I engage the clutch(while idling of course), the noise stops. When I rev up the engine, it doesn't get quieter, the engine just gets louder and the noise happens more rapidly. Likewise, when I turn off the engine they slow down until the engine's completely off. I just got toyota to replace the drive belts about 3 months ago so I know that's not it, unless there is something that I can put on the belts to quiet them. I haven't messed with the timing belt yet. When I get up to the engine, it sounds like it's coming more off the passenger side and sounds almost like it is coming from here: http://i154.photobucket.com/albums/s245/da...d/DSCF02642.jpg
But then again it could be the noise bouncing off from something else, but that area is where the noise is more concentrated.
Any ideas?


Also, when I am stopped at a light or something, SOMETIMES, the throttle feels like it is stuck and I have to push hard to get "through the stiff/really hard part" and then it's back to normal. Happens sometimes but sometimes not. Any ideas on this issue as well?

Thanks everyone

Edit: added details

This post has been edited by dabazied: Dec 19, 2007 - 3:08 PM


--------------------

She's Alive...... Again!!!
QUOTE (95CelicaST @ Nov 17, 2009 - 5:53 AM) *
QUOTE (SwissFerdi @ Nov 16, 2009 - 8:53 PM) *
QUOTE (95CelicaST @ Nov 16, 2009 - 11:51 PM) *
Sweet Jesus.


You rang?


Sorry, wrong number. :laugh:
 
Start new topic
Replies
post Dec 19, 2007 - 4:11 PM
+Quote Post
GriffGirl



Enthusiast
*****
Joined Feb 7, '07
From Portland, Oregon
Currently Offline

Reputation: 67 (96%)




be sure you replace your throwout bearing when you do the clutch, mine makes the same noise and I was told that's what it was. Unfortunately my clutch is pretty new, I guess the guy who did the work cut corners on the previous owner. The bearing is only like twelve bucks. Lame!


--------------------

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 2:47 PM