Need help power steering leaking out of the wazoo, I picked it up from xat with leaking power steering, replaced line now Options

[yarik83]

I have replaced a high pressure power steering line because old one was leeking. New one is leaking like 10 times more. It leaks as much as I pour. I added another washer and a rubber washer and retightened everything and its leaking like 5th of july leakage parade. Is 3sgte 3rd gen not compatible with 5sfe high pressure power steering hose? I am running out of options here. I spent like 40 hours this week alone shoving my hands into tight crevises basically spending like 15 mins to unscrew a bolt, clean everything and yada yada.

I cant take it to any shop cause steering wheel is on hydrostarve lock and turns only 1 inch each side and or if you really push it you can turn it fully in about a minute.

have any of you swappers had that problem? What else is there to do? sealant wont work either.. tried that.

its leaking a stream about as big as this letter O in a steady flow like out of faucet. Its on under side of where hose meets engne and I cant see if anything is cracked or not. To touch everything seems just fine.

[malecrod]

Yeah, its a pita to do the power steering. Just replaced mine last weekend. I would suggest getting a new washer from toyota if you haven't already. Then use your hand, then a wrench then a torque wrench to tightened it. The space is really really tight to work. So the only way to know its screwed on to spec is by torque wrench. Also make sure there is no crack anywhere in the hose from working in the area. It may actually may not be leaking from the banjo bolt itself. Walmart sells this portable lamp light that you see a lot at auto shops for about $10 and its very good to use underneath the car.