![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jun 3, '06 Currently Offline Reputation: 0 (0%) ![]() |
Hey guys i just got done running my power wire for my amp under my fender ( similar to this: http://www.6gc.net/forums/index.php?showtopic=39354&hl=) and i cut the grommet going into the footwell alittle and i was wondering if anyone had any water leakage when they did this cause that wouldnt be good. I didnt think it would leak so i put it all back together but i was just wanting to be sure before i took her down the road. I cut the grommet with the black wires coming out, not the one that has the air bag wireing or the hood release. Thanks
|
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) ![]() |
I've only had one leak but it was enough. Now just to be sure I pack a little silicone caulk or black RTV (whichever is handy) around the wire and onto the grommet. Odds are you won't have a leak but a little extra protection never hurts.
|
![]() ![]() |
Lo-Fi Version | Time is now: February 17th, 2025 - 3:20 AM |