Need help with tint Options

[all4sho94st]

I noticed today that my tint was starting to wrinkle and i wanted to know if anyone could help me on how to get rid of them.

[DG_Performance]

Hey guys!
I tint windows professionally and would love to wal you through the easiest steps to tint your windows. Trust me....I know all the little tricks cause I have been tinting windows now for about 9 years! First off if you are serious about tinting you own windows .... I hope you are patient and have steady hands. If you are neither stop and go pay someone to do it. If you plan on tinting the little back rear windows you can do them pretty easily. You will need a heat gun if you are thinking about doing the doors or the back window. I can make your job alot easier if you buy pre-cut pre-heater tint from me but that is just out there to save you guys time and (money you would have to spend on a heat gun). Anyway take your tint and lay it out on the window you want to tint (first spray the window with some windex or something and when you lay the tint on the window squeegee it to get it to stay in place so you can cut it) , hang a shop-light "inside your car" so you can see the black outline of the window "from the outside of the car". Take a razor and cut about 1/8 to 1/4 of an inch around that black border trim. now you have the tint cut in the patern of your window that you want to tint. Put two peices of tape against opposite sides of the tint and peel the clear side away and spray tint (glue side)with spray mix. hopefully you have the inside of the window clean and you can spray it with spray mix too. then just take the tint from the outside and stick it to the inside and squeegee all the bubbles out from the inside of the window working your way out.
thats it!
i tried to put up a how to article but it never got posted for some reason???
DG