 Engine rebuild and vacuum problems finished, Thanks Tweak/Pressure/Lagos for your help |
 Jan 17, 2008 - 12:37 PM
|
 
|
 Enthusiast  Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%)  |
I need to know what the ignition timing for a '93 3S-GTE is [I know the 5S is 10BTDC but I need 3S-GTE] and a vacuum diagram for it. I'm having a bit of trouble with a slightly rough idle and need to set the timing afterwards. Also the idle is too high and I figure both issues are related. The sensors were working fine when I rebuilt the motor so I have to assume they are working fine still.
Further does anyone have a good method for identifying vacuum leaks? I've heard of the carb cleaner method but I worry that may damage a sensor as they are very sensitive to that stuff. Please guys - any help you can give me would be great. Let me know if you need any more info about my setup [feel free to check out my profile for info as well] Thanks in advance. This post has been edited by DEATH: Jan 21, 2008 - 7:46 AM --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
 |
Replies
|
Jan 21, 2008 - 6:27 PM
|
|
 Enthusiast Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%) |
??? All BOV's need a vaccum source? In this case when i got the car it was getting it from the coffe straw vac off of the TB, so i capped the coffe straw and "T"'d off of a proper intake manifold vac, so the bov works the way its supposed to (before it would just flutter) and the boost guage is more accurate this way...
|
Posts in this topic
DEATH Engine rebuild and vacuum problems finished Jan 17, 2008 - 12:37 PM
DEATH Come on man - noone will help me out? I've sea... Jan 17, 2008 - 4:40 PM presure2 QUOTE(DEATH @ Jan 17, 2008 - 12:37 P... Jan 17, 2008 - 4:42 PM DEATH You rock Pressure!!!
I knew I could co... Jan 17, 2008 - 4:45 PM
presure2 QUOTE(DEATH @ Jan 17, 2008 - 4:45 PM... Jan 17, 2008 - 5:06 PM DEATH Much thanks bro.
On the soapy water test I'm l... Jan 17, 2008 - 5:30 PM DEATH QUOTE(DEATH @ Jan 17, 2008 - 5:30 PM... Jan 18, 2008 - 10:01 AM DEATH OK - I'm pretty sure I have her all hooked up ... Jan 18, 2008 - 3:27 PM 95celgt first put your foot behind the gas pedal and pull ... Jan 18, 2008 - 4:54 PM DEATH Ill try that - thanks.
I wish I could find a vacuu... Jan 18, 2008 - 5:38 PM lagos celicatech.com should have everything you need in ... Jan 18, 2008 - 5:41 PM DEATH I'm checking it out right now - thanks. Unfort... Jan 18, 2008 - 5:55 PM DEATH Fixed - Saturday I found the vacuum problem with n... Jan 21, 2008 - 7:26 AM 95celgt so what was it after all??? VSV? TVSV? Jan 21, 2008 - 11:16 AM DEATH No it was a hose that runs from the hardlines next... Jan 21, 2008 - 12:15 PM DEATH Did not know that. I have always used stock recirc... Jan 22, 2008 - 2:31 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 2:18 AM |