greddy emanage ultimate Options

[1994toyotaracer]

hey guys i see everyone has came to the conclusion that the greddy emanage ultimate is the way to go i just have some questions like
1 whats the big difference between the enanage and emanage ultimate
2 does anyone have a write up on how to install and wire
3 what harnesses do you need for it like igntition injector etc
4 does anyone have basic tunning settings
and 5 where is the cheapest place to get one


thanks

[Tony_the_Tiger]

Hey presure2, the wiring portion is straight forward; but due to differences between US/CAN/Cali spec ECU's in a variety of years, I cannot confirm exactly which pinout it would be for your particular Celica. The wire I intercepted is the white wire located on Plug A Pin#20... As long as the wire you decide to use is labelled as "IGT" which is a wire that leads to the ignitor module, then it is all good. You can verify this wire by testing the continuity between the ignitor's white wire and at the ECU.

At the E-manage's section, you will need to configure the ignition output signal jumper (JP8) to 12v by referring to the manual