6G Celicas Forums

Welcome Guest ( Log In | Register )

> Clutch Non Grata, Need Help!
post Feb 12, 2008 - 4:59 PM
+Quote Post
thespacepanda



Enthusiast
***
Joined Apr 12, '07
From Houston, TX
Currently Offline

Reputation: 4 (100%)




Ok, so the other night I was driving around and I was sitting at a red light with my clutch all the way in and the car in 1st. The car started to move forward like an automatic and when I tried to take it out of gear I couldn't pull it like the clutch was out. I did the only thing I could which was push the brake and let go of the clutch, killing the car. This happened once and didn't happen again until yesterday, when it started doing it more frequently. Here's the raw symptoms:
  • Car shifts just fine at speed
  • Clutch engages even though pedal is in
  • Only does it while sitting still with clutch pedal all the way in
  • Pedal loses almost all pressure after dying but regains after pumping a few times

DEATH said that he had a similar problem and replacing the slave cylinder fixed the problem. Any ideas?


--------------------
"He won't come out of the bathroom. He keeps telling us we're dark somethings and not his friends."
"Hmm. Ask him if he's the dragon reborn."
"What?"
"Just do it."
".......He said yes."
"Tell him you are not darklings. He should open up."
".......Sweet. Thanks."
"No problem."
 
Start new topic
Replies
post Feb 12, 2008 - 5:40 PM
+Quote Post
thespacepanda



Enthusiast
***
Joined Apr 12, '07
From Houston, TX
Currently Offline

Reputation: 4 (100%)




Cool. So that's my first attempt. Here's the big question:

Is the slave cylinder located inside the gearbox or more importantly, do I have to take the gearbox off to get to the slave cylinder? (I don't know what it looks like or where it is)


--------------------
"He won't come out of the bathroom. He keeps telling us we're dark somethings and not his friends."
"Hmm. Ask him if he's the dragon reborn."
"What?"
"Just do it."
".......He said yes."
"Tell him you are not darklings. He should open up."
".......Sweet. Thanks."
"No problem."
post Feb 12, 2008 - 5:55 PM
+Quote Post
94celicadude



Enthusiast
***
Joined Mar 28, '04
From St.Louis
Currently Offline

Reputation: 15 (100%)




QUOTE(thespacepanda @ Feb 12, 2008 - 10:40 PM) [snapback]640835[/snapback]

Cool. So that's my first attempt. Here's the big question:

Is the slave cylinder located inside the gearbox or more importantly, do I have to take the gearbox off to get to the slave cylinder? (I don't know what it looks like or where it is)


no the slave cylinder is bolted onto the outside of the gearbox.

if you open your hood, look down to where your gearbox and engine meet up, you will see either a little blue or brown slave cylinder.

sorry i dont have a good picture to show you where it is located, but i think you can find it.

Good luck


--------------------

1994 GT Hatchback
1994 ST Coupe
1988 Corolla Wagon All-Trac
1999 Corvette
2008 Cobalt SS Turbo

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 18th, 2025 - 6:49 PM