7th gen brake system !, pics are up ! Options

[Culpable04]

I ordered a pair of 7th gen front calipers and today finally took the time to test fit one of them, the brake line is exactly the same, the brake bolts into the same exact location, but the bolts on the GTS are longer so we have to use the bolts from the ST, obviously we need the rotors and pads from the 7th gen ( just in case someone dare to ask ) .

I know that there have been a lot of discussions about this, and they all said that they fit but no one tried it, so just in case someone else is wondering if they fit, YES they do,

I'll take pictures when I get everything ( rotors, brake lines, pads ) to show the fitment.

I ordered EBC slotted rotors, green stuff brake pads, SS brake lines and motul brake fluid. looking at one or two week to install everything.


if you want any specific pictures, let me know so I'll take them during installation.

This post has been edited by Culpable04: Feb 21, 2008 - 6:46 PM

[Culpable04]

The brake pressure difference between these calipers should not be all that different... I mean... most big brake kits use the stock master cylinder, so I highly doubt you're lacking pressure. I think there's something else wrong.

if you have any ideas of what else I should check, please tell me so, I ran out of ideas, at the beginning I though maybe the cylinder is bad, so I replace it with a new one, and everything on the front is basically new, the rear are untouched, I'm gonna bleed everything again as suggested, so if there is anything else I should check please let me know guys.