6G Celicas Forums

Welcome Guest ( Log In | Register )

> Audio System, A few last questions, before i finalize
post Feb 20, 2008 - 12:11 PM
+Quote Post
Legit94GT

Enthusiast
***
Joined Feb 6, '08
From Oregon
Currently Offline

Reputation: 8 (100%)




So I have big plans for my audio system for my car... I am going to run 2 10"s in the trunk in custom fiberglass housing, and add two 5"x7" into the hump in the back seat, add upgrade all speakers in the car.

This is the early stage of the build i dont know what i kind of anything i will be running, but i got hook ups at car toys at get crazy deals(like my 800+ alarm i got for 350 installed) So anything i add will be high end, keep that in mind. My girlfriend runs 1,000 watt amp off two tens and they sound great, since i have a smaller car i figure that running 1,000 watts plus a 8.2 sound system should be freaking awesome And yes she loves to throw it in my face that her stereo kills mine frown.gif

Part 1. Subs in Fiberglass
I want to palce subs up by the hinges for my trunk, right above the wheel wells, i think i can fit some slim subs in there, or maybe evern full sized... If i mount them up there should i build a metal bracket to hold it in place then build the fiber enclosure around that? What are some of the Pro's and Con's of having subs in fiberglass enclosers? Does it hurt the sound quality? Could i break the subs out of the fiberglass, or crack it?

ok imagine that but surrounded with fiber glass to make it look like it belongs in the car:)
IPB Image


Part 2. 5x7 in the back.
I am planning on taking out the bottom half of the back seat and cut out the center part of the hump. the distance between the two lines that run down the middle of the hump are like 4.75" apart so i am planning on cutting all of that and then some to make room for the two speakers. This way i will keep the back seat looking and feeling mostly stock. I am planning on running plexy glass where there use to be soft padding and middle back seat, so that the speakers will mount onto that so you can see the speakers(and sit on them, the only downside).

So has anybody taken out the bottom of their back seat (i have coupe, not sure if that matters), if so is there so long process or is it straight forward?

kinda what i am thinking here
IPB Image


Part 3. Power
I have red alot of forums where people drop in these huge systems the cant power them off a their stock alt, i do not feel like going through all that trouble untill i have to (IE when it goes out, then i'll put in a nice one) So i was thinking i could just run a second battery to power my sound system. I could find alot of info on how that would get wired exactly... Would i have to wire my head and all my speakers, subs and amp to my second battery then have a kill switch for it? Then i would just run that untill that battery died? Where do most people put it, i was think under the passenger seat... or under the hood?

I am sort lost on how that all works, if someone could explain it to me just how running a two battery set up would work tht would be amazing, because i think that is the way i want to go for power.

Part 4. Amp
Generally speaking here, With all of the above mentioned speakers and subs would 1,000 watt amp and a good head unit be enough to power everything or should i plan on going much bigger??


Again sorry for the bad pictures and those are by no means what i will be buying for this, those were just quick googled images. Thanks in advance for the advice and suggestions smile.gif

This post has been edited by Legit94GT: Feb 29, 2008 - 12:19 PM


--------------------
1 JL 1,000/1v2
2 JL 12" W6v2
2 Focal 6.5 component 165a1
Kenwood DDX512 head unit

Running 142.6db with the back seat up:)
 
Start new topic
Replies
post Feb 20, 2008 - 7:54 PM
+Quote Post
Legit94GT

Enthusiast
***
Joined Feb 6, '08
From Oregon
Currently Offline

Reputation: 8 (100%)




QUOTE
Problem with running the speakers in that hump bit. If you have them one above the other like that you'll lose the stereo effect. it'll be loud, yes, but the sound quality will go down.
kindasad.gif
Ya i totally thought about having those speakers stacked liked that and the sound quality but i think they would just look so freaking sweet that i'd get over it smile.gif

QUOTE
I ran 2 batteries in the Celica with the stock alternator running all day long with no problem. I had a kx1200.1 kicker amp running 2 L7's (1440 watts rms btw) and had no problems what-so-ever. All you have to do is run a power wire from the front battery to the back battery, and have a good ground. That way the front battery will charge the back while the car is running.


Good info, thank you. I think i will run a setup like that... i'll probablly put in a better alt when my car is all tore apart getting turbo'd. so that will help... and what is the worse that'll happen, i have some power drops and stuff when i first put it in, then i just go buy a bigger alt, so what if i have power drops for a day or two...


Thanks Dman for the fiberglass help, i have never done it before but am looking forward to trying it out and making it smile.gif it will be fun, i have a cool idea on how to get the shape i want from it...

I think i'll just fab up a custom bracket to secure my sub to my car, seeing as how i have access to full metal shops and have been working in them since i was 15 it wont be hard for me to do at all smile.gif it should be pretty awesome


--------------------
1 JL 1,000/1v2
2 JL 12" W6v2
2 Focal 6.5 component 165a1
Kenwood DDX512 head unit

Running 142.6db with the back seat up:)

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 22nd, 2025 - 10:37 AM