![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 28, '04 From St.Louis Currently Offline Reputation: 15 (100%) ![]() |
Exhaust System
I dont care that it comes from SSautochrome, i was just wondering how much of this system would actually bolt up to a 1994 GT HB? i can tig weld so that is not an issue if welding is needed, but could i get it more than just the cat-back portion of it bolted up? or because its meant for a GT-4 it runs besides the drive shaft and wouldnt fit at all? -------------------- ![]() 1994 GT Hatchback 1994 ST Coupe 1988 Corolla Wagon All-Trac 1999 Corvette 2008 Cobalt SS Turbo |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Feb 4, '08 From UK Currently Offline Reputation: 0 (0%) ![]() |
From the picture it looks like the bit where the flexi pipe is situated compared to the GT cuts off short to allow for would normally be on the GT4 the turbo downpipe. On the GT this continues up and meets the manifold.
Alos from the back box on my GT it has a straight pipe before it bends, whereas the GT4 bends immediately, I guess to allow for the rear wheel drive axel perhaps! Don't quote me on this as it's only from looking at a photo and seeing only a handle of GT4 exhaust systems but the unless your willing to do a fair bit of extensive welding and fitting to get a custom exhaust then it wont fit! Why not just get the Blitz Realize TT, which is specific for our cars, with a 60.5mm Cat back system and 100mm tailpipe! -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 12:14 PM |