Exhaust, will this fit? Options

[94celicadude]

Exhaust System

I dont care that it comes from SSautochrome,

i was just wondering how much of this system would actually bolt up to a 1994 GT HB?

i can tig weld so that is not an issue if welding is needed, but could i get it more than just the cat-back portion of it bolted up?

or because its meant for a GT-4 it runs besides the drive shaft and wouldnt fit at all?

[presure2]

Exhaust System

I dont care that it comes from SSautochrome,

i was just wondering how much of this system would actually bolt up to a 1994 GT HB?

i can tig weld so that is not an issue if welding is needed, but could i get it more than just the cat-back portion of it bolted up?

or because its meant for a GT-4 it runs besides the drive shaft and wouldnt fit at all?

#1 unless you have a 3sgte swap, you will loose performance with a 3" exhaust like this one.
#2. since you have an st, none of these parts will bolt up.
#3, SS autochrome stuff is noturious for bad fitment, especially with these exhaust parts.
from what ive read, the 185 exhaust dont fit the car at all.
#4 if you can TIG, why not weld up your own custom exhaust?

[94celicadude]

Thanks for the info guys

#1. i understand that i would loose performance with this system
#2. I have both and St and a GT
#3. I have heard that about ssautochrome a lot, glad to be reaffirmed that they have bad fitment
#4. I can TIG weld, i was just wondering if i could use this and do slight modifications, i dont have a lift so welding up a system is harder for me because i have to keep crawling under the car every two mins.

Thanks for the info about this guys, i was just curious to see if any of this system would remotely match for a GT, but it seems like it will not.

This is why i ask questions here, because you all have so much more knowledge than i do.

Once again thanks

Matt

Exhaust System

I dont care that it comes from SSautochrome,

i was just wondering how much of this system would actually bolt up to a 1994 GT HB?

i can tig weld so that is not an issue if welding is needed, but could i get it more than just the cat-back portion of it bolted up?

or because its meant for a GT-4 it runs besides the drive shaft and wouldnt fit at all?

#1 unless you have a 3sgte swap, you will loose performance with a 3" exhaust like this one.
#2. since you have an st, none of these parts will bolt up.
#3, SS autochrome stuff is noturious for bad fitment, especially with these exhaust parts.
from what ive read, the 185 exhaust dont fit the car at all.
#4 if you can TIG, why not weld up your own custom exhaust?