abs light codes? |
abs light codes? |
Feb 24, 2008 - 2:22 PM |
|
Enthusiast Joined Feb 21, '08 From Saint John, NB Currently Offline Reputation: 0 (0%) |
my abs light has been on since i'v owned the car so today i figured i would see what was the problem, so i did some searching on here and found out how to check the code, well i did what they said TC and E1 and all that did was make my cruise control and airbag lights flashes repeatedly and my abs light stayed on constantly, then i decided to check my engine codes just for ****s and giggles and got a 25 code from that :S anyone know the proper way of check the abs codes? or am i just missing a step?
-------------------- 94 Celica GT Hatchback 5spd
89 Nissan 240sx coupe 5spd -RIP 87 BMW 325 2dr 5spd - SOLD- Gone but never forgotten |
Feb 25, 2008 - 8:10 PM |
|
Enthusiast Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
If your ABS light stays steady when you jump the terminals the ABS ECU is probably bad....
Try resetting it and see what happens. You can clear all codes by jumping Tc and E1 with the key on. With it jumped press the brake pedal 8+ times in 3 seconds or less. Or you can disconnect the battery [or just pull the fuse]. Physically removing power will completely reset the ECU and MIGHT solve the problem. *Did you pull the short pin out of the diag box before you jumped the terminals? Its in the furthest corner from the "hinge" on the cover of the diag box.* -------------------- |
Lo-Fi Version | Time is now: December 2nd, 2024 - 5:16 PM |