TMIC Intercooler 3SGTE, Water injected 3rd Gen? Options

[Jabberwock]

Does the 3rd Gen 3SGTE have a water injected intercooler?

And if thats the case there was a post before that stated a Twin Intercooler which is kinda creative.

But it was explained that it would be too hard for the turbo to suck in air from both, but if the 3rd Gen has Water Injected...would it not be a little more helpful if you had a real small FMIC to keep the turbo cool with air and water, and the small intercooler would not effect the lag as much? Possibly add a sprayer too.

heh....just babbling, it just seemed interesting with this case and since I got a 3rd gen 3SGTE being put into my car.

[Guest_Matthew_*]

ok here is a quick draw up of how a turbo and intercooler works

you can see the filter it sucks air into the turbo ...the browner part of the turbo has a wheel that gets spun by exhaust air exiting the engine then in turn is connected to another wheel (silver part) which does two things at once. 1st thing sucks in air at a faster rate by using the fins on the end of the blades on the wheel. then blows or pushes the air through the turbo through the piping into the intercooler which while you are driving is being cooled by the oncoming air then out the other side (sometimes same side) back into the intake manifold.


on the tmic its the same thing just that the intercooler is cooled by water than the air outside.