7th gen brake system !, pics are up ! |
7th gen brake system !, pics are up ! |
Feb 7, 2008 - 9:45 PM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I ordered a pair of 7th gen front calipers and today finally took the time to test fit one of them, the brake line is exactly the same, the brake bolts into the same exact location, but the bolts on the GTS are longer so we have to use the bolts from the ST, obviously we need the rotors and pads from the 7th gen ( just in case someone dare to ask ) .
I know that there have been a lot of discussions about this, and they all said that they fit but no one tried it, so just in case someone else is wondering if they fit, YES they do, I'll take pictures when I get everything ( rotors, brake lines, pads ) to show the fitment. I ordered EBC slotted rotors, green stuff brake pads, SS brake lines and motul brake fluid. looking at one or two week to install everything. if you want any specific pictures, let me know so I'll take them during installation. This post has been edited by Culpable04: Feb 21, 2008 - 6:46 PM -------------------- |
Feb 29, 2008 - 8:50 PM |
|
Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
^ that, and also the possibility that with 7th gen calipers, new (thick) brake pads and the thicker 6th gen rotors, the extra 3mm rotor thickness might be too much...
anyway, i just checked the ST and GT brakes... they have the same caliper mounting bolt distances, same steering knuckles and same hubs.. i don't see why it wouldn't work on a GT. we just need to get this confirmed now.. any takers? -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Feb 29, 2008 - 9:20 PM |
|
Enthusiast Joined May 12, '06 From Wilmington, NC Currently Offline Reputation: 45 (100%) |
QUOTE(azian_advanced @ Feb 29, 2008 - 5:50 PM) [snapback]647921[/snapback] ^ that, and also the possibility that with 7th gen calipers, new (thick) brake pads and the thicker 6th gen rotors, the extra 3mm rotor thickness might be too much... anyway, i just checked the ST and GT brakes... they have the same caliper mounting bolt distances, same steering knuckles and same hubs.. i don't see why it wouldn't work on a GT. we just need to get this confirmed now.. any takers? the 6th gen GT rotor is 3mm thinner than 7th gen rotors, not thicker. there shouldn't be an issue with the rotors/pads being too thick to fit in the caliper. I'll put them on and test them out if somebody wants to give me the calipers -------------------- 94 GT - Sold -------- 69 Pontiac Lemans - Sold 88 Alltrac - Sold ---- 04 WRX - Sold 00 GT-S - Sold ------ 91 Miata - project/drift car 95 GT - Sold -------- 96 GT - New Daily Drive |
Lo-Fi Version | Time is now: November 28th, 2024 - 6:13 PM |