Max Power NA 7afe ????, Dyno Charts Posted Options

[94celicadude]

Hey all,
I am currently building up my 7afe, i have bought a separate head and have already had new valve guides installed, its been cleaned and i have brand new toyota valves, exhaust and intake, i have had the intake ones machined to have more of the performance "penny on a stick" figure, i will post pics soon but for now here is an example Valves.

I am also going to have the Extrude Hone process ( Extrude Hone ) done to the entire head. The current 7afe in my car has a custom 4-1 headers (Headers), full exhaust, intake, clutch, lightweight flywheel, Apexi S-AFC II, bumped timing to about 14 degrees static timing. If i can find a used GT throttle body i will try to make it work, they seem to be fairly similar. Its been tuned and it has over 225k miles on the original engine. The gear box has been rebuild to brand new, and at last dyno the car was putting just about exactly 100 WHP on a 95 F day.

So i figure its already a healthy working little motor. To make this short, i was wondering who has had the highest NA horsepower out of a 7-afe . I am hoping to be able to build my motor to about 120-130 WHP, that would be ideal but im not sure exactly if i will achieve that goal. The bottom end is going to get first O.S. pistons, the head will be decked for a slightly higher compression ratio, and the entire engine will be blue printed. Then the entire crank assembly will be dynamically balanced with the flywheel and all the accessories on either end of it. Then it will all be put back together and have another tuning session on the dyno.

Now i know that it seems like a lot of money to do everything i am, which it is for only 130 WHP, but im looking to make this a great motor for auto-x. And if i have 200 WHP then ill just create a smoke show, so thats why im not just swapping in something else.

**CLIFF NOTES**

Who has the highest NA power 7afe with dyno numbers to prove it?

This post has been edited by 94celicadude: May 9, 2008 - 5:27 PM

[hurley97]

I agree with Art. That was also why I told my oil leak story, to make the point that these kind of things are going to happen and you just need to take care of them as they come and move on. If this ends up being your only problem you are lucky, I spent a good $400-500 on things that went wrong after the rebuild. i.e. towing, coolant, oil, crank seal, alternator, O2 sensor, not to mention the added frustration of having all that go wrong on a motor with less than 1,000 miles that I just put a lot of time, work, and money into.

I also think this is a great project, I thought I was the only one who thought the 7A was worth rebuilding, its nice to know I'm not alone