 metal in oil and now other things |
 Mar 11, 2008 - 9:37 PM
|
 
|
 Enthusiast  Joined Nov 20, '03 From Derry, NH Currently Offline Reputation: 2 (100%)  |
so i need some help on this one today my girlfriend was driving my celica, it ran fine all day until she stopped and shut the car off for 15 minutes , she gets back in and the car wont start, just cranks over. after about five minutes bam the car starts and runs fine. She get its back here and i take a look at it . its running fine no knock. purring like it always does. so i shut it off, and guess what happened 20 minutes later . wont start . so i wait about a minute try again and it starts up. so i pop the hood and start looking around to see what going on. I found that the spark plug wires had **** the bed so changed them. then i decided to change the oil. and i found metal particles in the oil.
  Could these to things be related and what could be the metal in the oil. keep in mind the cars oil pressure never drops below 25 psi when running, it has no knock what so ever. and it idle at round 5-700 rpm. it sounds to me like im chewing up a rod bearing, or main bearing, but it dosent show any other symptoms but these . Sean This post has been edited by blckcelica95: Mar 17, 2008 - 8:42 PM -------------------- |
 |
Replies
|
Mar 14, 2008 - 9:34 AM
|
|
|
Enthusiast Joined Nov 20, '03 From Derry, NH Currently Offline Reputation: 2 (100%) |
so i was talking to a couple people about oils and i was told that synthetics oils can become abrasive, has anyone else heard that ?
-------------------- |
|
Mar 14, 2008 - 11:53 AM
|
|
 Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
QUOTE(blckcelica95 @ Mar 14, 2008 - 9:34 AM) [snapback]653770[/snapback] so i was talking to a couple people about oils and i was told that synthetics oils can become abrasive, has anyone else heard that ? Sounds like some more of the usual BS from haters who can't afford synthetic. --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Mar 17, 2008 - 8:11 PM
|
|
 Enthusiast Joined Jul 7, '03 Currently Offline Reputation: 55 (100%) |
QUOTE(DEATH @ Mar 14, 2008 - 9:53 AM) [snapback]653857[/snapback] QUOTE(blckcelica95 @ Mar 14, 2008 - 9:34 AM) [snapback]653770[/snapback] so i was talking to a couple people about oils and i was told that synthetics oils can become abrasive, has anyone else heard that ? Sounds like some more of the usual BS from haters who can't afford synthetic. I've never heard that. I didn't have such great luck with synthetic, I switched back to castrol. It may have been coicidence but I started going through oil fast, the 97 st motor seems notorious for that. It may have had nothing to do with synthetic oil and may just be valve guides, but I figure why keep pouring 6 dollars in every 1500 miles pour 3 instead. -------------------- JDM guy made me do it.
|
Posts in this topic
blckcelica95 metal in oil and now other things Mar 11, 2008 - 9:37 PM
rjbibeau shouldn't it be like 40-50 psi.....someone cor... Mar 11, 2008 - 9:46 PM Bitter what did the particles look like? tiny sparkles? f... Mar 11, 2008 - 10:01 PM
blckcelica95 QUOTE(Bitter @ Mar 12, 2008 - 3:01 A... Mar 11, 2008 - 10:06 PM Bitter QUOTE(blckcelica95 @ Mar 11, 2008 - 10... Mar 11, 2008 - 10:24 PM rjbibeau when your driving it should be near 80's Mar 11, 2008 - 10:13 PM blckcelica95 QUOTE(rjbibeau @ Mar 12, 2008 - 3:13... Mar 11, 2008 - 10:16 PM rjbibeau sorry i meant to say it peaks at 80....does your o... Mar 11, 2008 - 10:20 PM blckcelica95 QUOTE(rjbibeau @ Mar 12, 2008 - 3:20... Mar 11, 2008 - 10:23 PM blckcelica95 there was a fair amount coming out, but it was ... Mar 11, 2008 - 10:27 PM jesterwr217 when that happened in my old ford probe the engine... Mar 11, 2008 - 11:11 PM blckcelica95 so i popped the pan off this mourning, and to my s... Mar 12, 2008 - 10:15 AM rjbibeau it's fine in the car just don't move the c... Mar 12, 2008 - 11:22 AM 97GTinKC If it has only 4000 miles since re-build, I'd ... Mar 13, 2008 - 9:44 AM speedfeen This happened to me once in my 6
my engine was sl... Mar 13, 2008 - 10:10 AM 97GTinKC QUOTE(blckcelica95 @ Mar 14, 2008 - 7... Mar 14, 2008 - 11:35 AM playr158 synthetic oil isn't abrasive...its better at L... Mar 14, 2008 - 11:38 AM lagos change your oil like the mechanic said and keep an... Mar 14, 2008 - 1:02 PM Bitter another thing, only 4k into a fresh engine you wil... Mar 14, 2008 - 8:22 PM 6G96GT Usually if it's rod bearing particles, it woul... Mar 16, 2008 - 2:20 PM Bitter most crucial, yes for sure. but for upto 10K mile... Mar 16, 2008 - 2:44 PM celicast3sgte this is getting rediculous the rumors that are out... Mar 16, 2008 - 4:29 PM Bitter i've heard the opposite about synths and break... Mar 16, 2008 - 4:38 PM blckcelica95 i have changed the oil 3 time since the motor was... Mar 16, 2008 - 7:50 PM blckcelica95 so here is my newest issue and since it may have ... Mar 17, 2008 - 6:58 PM Bitter so you're getting a misfire under boost., corr... Mar 17, 2008 - 7:34 PM blckcelica95 13-12 range i have recorded the issue on my data ... Mar 17, 2008 - 7:37 PM Bitter QUOTE(blckcelica95 @ Mar 17, 2008 - 7... Mar 17, 2008 - 9:09 PM blckcelica95 QUOTE(Bitter @ Mar 18, 2008 - 2:09 A... Mar 17, 2008 - 9:39 PM Bitter eh, 10 to 11:1 is rich, but not soo rich it should... Mar 17, 2008 - 9:48 PM blckcelica95 i will take another log tomorrow. the timing o... Mar 17, 2008 - 10:08 PM 6G96GT Here's some ideas...leaky ecu?? Improper A/F (... Mar 20, 2008 - 8:26 PM blckcelica95 QUOTE(6G96GT @ Mar 21, 2008 - 1:26 A... Mar 20, 2008 - 8:29 PM Bitter that'll do it. under boost you need ALL of th... Mar 20, 2008 - 8:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 13th, 2025 - 1:42 PM |