Engine Swap Question? Please Help!! Options

[94celigts]

Hey guys im doing an engine swap this weekend, just 5s for 5s. What I was wondering is will i need to replace engine mounts or anything of that nature. Or really, will I be able to recognize a bad mount? Also I was wondering if anyone had some time if they could maybe make me a short paraphrased process to follow so that I could rip through this with as least trouble as possible. Things to remember, Easiest Process to do things and so on. I tried to find something with search but was not able. I really wanted to do the 3SGTE but this situation came up and i need it done quick and this weekend is the only one i have off. I wish i didnt need my car but i really do. I picked up a 5s with a cracked valve cover and no distributer for 200$ with a 3 month warrenty with 50000km on it. So I was planning on the swap and then put my distributer on it and my valve cover.

Thanks for the help guys. As well maybe a parts list I may need to make it easier too.

This post has been edited by 94celigts: Mar 19, 2008 - 9:08 PM

[Blurr05]

It took me more than a weekend to swap my 7AFE but it was also my first and only motor I have ever replaced. I disconnected the tranny from the motor. I'm not sure if you would be able to pull the engine and the tranny out as a whole. I agree with Hanyo and highly recommend replacing your rear main crankshaft seal while the motor is out. I also put in a new clutch and had my flywheel resurfaced since I had the motor out of the way of the tranny. From there I just replaced all my belts gaskets, a few hoses, the thermostat and did the timing. Now she runs great and I have a motor with only 50,000 on it! Good luck!