6G Celicas Forums

Welcome Guest ( Log In | Register )

> DEATH's GT2 Progress [Updated 01-24-13], 6 years/60k? Miles and FCUKING RIDICULOUS!!!
post Mar 24, 2008 - 3:55 PM
+Quote Post
DEATH



Enthusiast
*****
Joined Dec 19, '07
From tx
Currently Offline

Reputation: 22 (100%)




As the topic says my car wants to die on me. Actually before I get to the current problem I'll detail my 4 day weekend/Gremlin attacks:
1. [Thurs - day one of a promising 4 day weekend rolleyes.gif ] I should mention first that noone ever works on my car but me - but I've had it with opening the engine for at least a few months so: Got the intake cam set properly finally by a Toyota dealership for the cheapest price anyone quoted me! I went to Joe Myers Toyota as the last shop I was gonna try just for sh*ts and giggles and through some stroke of fate I got the coolest service manager ever. My budget was to be $200 tops with the work done in one day. First shop tells me all kinds of BS that I know isn't true about the 3S and he quoted 4 hours labor [$400] and 3day wait. I laughed and left there laugh.gif . After shopping around 4 different other shops the best price was $210 with same day service. As I already said I went to Toyota for the hell of it [and to pick up some oil filters for the oil change I was planning for Fri morning] and they looked it up and said it's 2.5hrs labor at $100 each so $250 - over budget so I was gonna try to talk the $210 guy down to $200 tax included. Then the service guy said "well if I charge you for a timing belt job it'll still be $250 but I can take the cost of the belt off since your belt is only 2mos old. So that took the price down to $180+tax - perfect. To make things even sweeter I got to request my old friend NachoNismo [Toyota Tech at JMT] and he and his team did a beautiful job on it and even gave me free diagnostics, trouble code print out and several other freebies [BTW only code showing was 42 - Speedsensor not giving the ECM a signal within 8sec after hard driving? Could this be the same problem that won't allow my speedo to work? GT Tranny BTW]. When I went to pay my bill I got another pleasant surpise - $150 including tax!
So I got invited to the TX2K8 [Annual North American Supra Meet] dinner and meet at Frank-N-Steins and went there:
2. [Friday night] Blew my turbo coupling [the first one attached to the compressor outlet] into tiny little shreds so had to limp home with no boost [not a fun way to spend a 45min drive with a grouchy GF, two sleeping teens in the back seat and a pissed off Mega Chihuahua on the back hatch cover at 2:30 in the morning]. Got home and fixed that but discovered the coolant return line from the Turbo was spraying coolant [evidenced by the pancakes smell of burning off Toyota For Life Coolant]. Put a clamp on that and refilled the coolant with another $10 worth of coolant. So I need to take my GF to a Fetish Ball [Not like I wanted to go or anything laugh.gif ] clear on the other side of Houston about an hour away:
3. [Sat Night] So I get all the Gremlins slayed and start the car with the hood open, observing all the fixed problems and the gauges until the car warms up. So I back out of the garage and turn the lights on and Bam! - the car trys to die and generally runs like sh*t. Turn off the lights and idle returns to normal. Hit the brakes and the idle again drops and the engine runs like sh*t. And here's the real slap to the face - roll down the window and the car wants to die! So the GF is pissed again cause she's been looking forward to this for 3 months. Luckily for her Havok and his lady are going anyway so they offer to drive us and drop us off later [Thanks again Bro!] and we go to the FB and altho I usually enjoy myself immensly at these things my mind is with the car back in the garage and I ate something bad and felt like puking [almost did several times actually - Dry heaving FTL ]
4. [Sun] Woke up at 5PM with absolutely no energy and no drive to work on the car

So after that long dissertation I'd like to thank this guy for the very interesting weekend:

Fcukin asshats always playing games under my hood mad.gif

Now to my questions [Alltracman - help me out buddy]:
1. WTF is up with that code 42 and what should I check to get it diagnosed and fixed up and hopefully finally have a working speedo?
2. WTF is up with that electronics gremlin that makes any powered accessory cause the idle to drop and almost die? My first thought is bad ground connections - sound plausible? Ideas, theories or [hopefully] past experience?
3. Why can't I just go a whole week without something fcuking up on this car? Damn I miss my trustworthy, never fails to start and run like God designed it 5S.

Now this my friends and potential swap owners is why you have no business owning a car that you yourself did not swap [or like in my case - have already swapped a Celica in the past and felt like skipping the initial headache portion of the process]. If you don't know the 3S-GTE and all you've ever owned was a 5S or 7A - don't even consider having someone else swap your car - the experience and famliarity with the engine you will gain by swapping it yourself or with some friends is priceless. Seriously.

This post has been edited by DEATH: Jan 31, 2017 - 8:23 PM


--------------------

ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI]
PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO
SUSP: Tein/Bilstein/SusTech/
INT: SS-III SEATS/Toyota Hyper Sports
EXT: WRC/TRD/404
QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) *
Its a safety feature so that people like you don't end up killing themselves or everyone around them.
Slow down Paul Walker.

6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url]
 
Start new topic
Replies
post Mar 27, 2008 - 2:23 AM
+Quote Post
95celgt



Enthusiast
*****
Joined Oct 5, '03
From South TX.
Currently Offline

Reputation: 14 (100%)




I had installed a ground wire in the same place but bolted it to the wheel well, did you loose it when u pulled the motor out? it fixed the voltage real nice, gave me like 14.5V on the turbo timer:D...............God I miss that car frown.gif

When I go up to H-town, I hope u let me see the dam thing again lol

Posts in this topic
- DEATH   DEATH's GT2 Progress [Updated 01-24-13]   Mar 24, 2008 - 3:55 PM
- - presure2   i would say the power problem is one of 2 things. ...   Mar 24, 2008 - 4:03 PM
- - DEATH   Yeah I bought Chanh's old car but as I said I ...   Mar 24, 2008 - 4:11 PM
|- - presure2   QUOTE(DEATH @ Mar 24, 2008 - 5:11 PM...   Mar 24, 2008 - 4:23 PM
- - DEATH   Thanks so much Pressure. I can't get anything ...   Mar 24, 2008 - 4:40 PM
- - lagos   QUOTE(DEATH @ Mar 24, 2008 - 5:40 PM...   Mar 24, 2008 - 6:42 PM
- - lagos   QUOTENow this my friends and potential swap owners...   Mar 24, 2008 - 6:54 PM
- - politicsareevil   Matt..... end this all once and for all..... send ...   Mar 24, 2008 - 6:58 PM
- - alltracman78   Speedo first. Assuming the connection and wiring ...   Mar 24, 2008 - 8:31 PM
|- - DEATH   You fcukin rock. I love this site Got the parts ...   Mar 25, 2008 - 9:45 PM
- - Havok1997GT   Luckily for her Havok and his lady are going anywa...   Mar 24, 2008 - 9:45 PM
- - DEATH   Thanks Pressure, Lagos and Alltracman. 1. Celicate...   Mar 25, 2008 - 6:31 AM
|- - presure2   QUOTE(DEATH @ Mar 25, 2008 - 7:31 AM...   Mar 25, 2008 - 3:57 PM
- - 6strngs   get a multimeter and put the positive end on the n...   Mar 25, 2008 - 9:15 AM
- - DEATH   Will do. Thanks alot. Anything else guys? I'm ...   Mar 25, 2008 - 9:21 AM
- - phattyduck   The electrical load issue might also be the ...   Mar 25, 2008 - 1:34 PM
- - DEATH   Yeah - that's what I planned to do [since I ca...   Mar 25, 2008 - 4:06 PM
- - GriffGirl   Check your email, it's on its way. I'll b...   Mar 25, 2008 - 6:59 PM
- - DEATH   nvm double post   Mar 25, 2008 - 9:40 PM
- - Havok1997GT   good luck man. Hope everything works. (Knock on ...   Mar 25, 2008 - 10:04 PM
- - lagos   Dont bother testing the speed sensor. Im telling y...   Mar 25, 2008 - 10:25 PM
- - DEATH   You have no idea what a difference that damn groun...   Mar 26, 2008 - 1:26 PM
- - DEATH   OK Speedo issue now. I got these diagrams [they sa...   Mar 26, 2008 - 2:15 PM
- - alltracman78   See the speedo sensor in the diagram? 3 Wires comi...   Mar 26, 2008 - 3:09 PM
- - DEATH   You're the man - I knew one of you guys could ...   Mar 26, 2008 - 3:16 PM
- - alltracman78   The speed sensor has 1 connector. I doubt the wire...   Mar 26, 2008 - 3:30 PM
- - alltracman78   If you can't understand what the diagrams mean...   Mar 26, 2008 - 3:36 PM
|- - DEATH   QUOTE(alltracman78 @ Mar 26, 2008 - 3...   Mar 26, 2008 - 3:56 PM
- - DEATH   Ah! I think I understand now. That coupled wit...   Mar 26, 2008 - 3:37 PM
- - alltracman78   The easiest way is to find the wires in the 3S har...   Mar 26, 2008 - 5:14 PM
- - lagos   Bingo. You actually supposed to have a factory gro...   Mar 26, 2008 - 9:47 PM
|- - DEATH   QUOTE(lagos @ Mar 26, 2008 - 9:47 PM...   Mar 27, 2008 - 8:52 AM
||- - D-Man   QUOTE(DEATH @ Mar 27, 2008 - 9:52 AM...   Mar 27, 2008 - 8:58 AM
|- - phattyduck   QUOTE(lagos @ Mar 26, 2008 - 7:47 PM...   Mar 27, 2008 - 2:40 PM
|- - DEATH   QUOTE(phattyduck @ Mar 27, 2008 - 2...   Mar 27, 2008 - 2:52 PM
- - 6strngs   definately zip tie that wire to the AC lines or so...   Mar 27, 2008 - 1:11 AM
|- - DEATH   95celGT - Yeah no problem. I would feel the same w...   Mar 27, 2008 - 7:50 AM
- - 95celgt   I had installed a ground wire in the same place bu...   Mar 27, 2008 - 2:23 AM
- - DEATH   Watching my A/F this morning I think I need to cha...   Mar 27, 2008 - 7:41 AM
- - D-Man   Yeah, i can vouch for that. Death dont like doing ...   Mar 27, 2008 - 8:13 AM
|- - DEATH   QUOTE(D-Man @ Mar 27, 2008 - 8...   Mar 27, 2008 - 8:20 AM
- - 95celgt   I have a complete steering colum with clock spring...   Mar 27, 2008 - 2:06 PM
- - D-Man   okay, i got your back on the horn. I cant find the...   Mar 27, 2008 - 2:19 PM
- - DEATH   QUOTE(95celgt @ Mar 27, 2008 - 2:06 ...   Mar 27, 2008 - 2:31 PM
- - D-Man   yeah, when you feel safe enough to DRIVE the car (...   Mar 27, 2008 - 2:38 PM
- - lagos   I guess your right, I always remembered it bolting...   Mar 27, 2008 - 2:57 PM
|- - DEATH   QUOTE(lagos @ Mar 27, 2008 - 2:57 PM...   Mar 27, 2008 - 3:14 PM
- - lagos   That bar is the wrong length/size for our cars, so...   Mar 27, 2008 - 4:21 PM
|- - DEATH   QUOTE(lagos @ Mar 27, 2008 - 4:21 PM...   Mar 27, 2008 - 4:39 PM
- - Chanh55   Sounds like she's coming along nicely.   Mar 27, 2008 - 4:43 PM
- - alltracman78   You sort out the wiring yet? QUOTE(DEATH @ M...   Mar 27, 2008 - 9:57 PM
- - lagos   < - 0wned. All the while I thought it bolted t...   Mar 27, 2008 - 10:17 PM
- - lagos   The ecu has 3 harness plugs. Remove the 3rd ecu p...   Mar 27, 2008 - 10:57 PM
- - 95celgt   to be honest i dont know jack about how the horn w...   Mar 28, 2008 - 1:22 AM
- - DEATH   QUOTE(lagos @ Mar 27, 2008 - 10:57 P...   Mar 28, 2008 - 2:26 PM
- - DEATH   Shes getting her first oil change today: Mobile1 F...   Mar 29, 2008 - 9:32 AM
|- - presure2   QUOTE(DEATH @ Mar 29, 2008 - 10:32 A...   Mar 29, 2008 - 12:05 PM
- - DEATH   Sweet - thanks. Today I did the oil change and tri...   Mar 29, 2008 - 5:33 PM
- - DEATH   OK - Been a couple of months since I updated this....   Jun 18, 2008 - 7:36 AM
- - lagos   QUOTE 1. The AEM Wideband reads between 14.5 to 15...   Jun 18, 2008 - 9:33 AM
- - DEATH   Thanks Lagos - you've been a huge help so far....   Jun 18, 2008 - 9:55 AM
- - lagos   Tvsv (factory boost solenoid) Your supposed to dis...   Jun 18, 2008 - 10:03 AM
- - DEATH   You mean thats where the other line runs to and th...   Jun 18, 2008 - 10:21 AM
- - lagos   Your map sensor vac line goes to the intake manifo...   Jun 18, 2008 - 11:27 AM
- - DEATH   Gotcha thanks. One question tho - where is the TVS...   Jun 18, 2008 - 11:32 AM
- - 95celgt   TVSV is on the vaccum acessory rail at the bottom ...   Jun 18, 2008 - 11:55 AM
- - DEATH   nvm   Jun 18, 2008 - 1:18 PM
- - 95celgt   yeayea, i meant my FC3S RX7 well atleast i told...   Jun 18, 2008 - 1:21 PM
- - darthripley   TVSV limits your boost in 1st & 2nd gear to 5p...   Jun 30, 2008 - 3:17 PM
- - DEATH   Wednesday - My computer crashes - Hard. $2000...   Jul 3, 2008 - 6:16 PM
|- - DEATH   QUOTE (DEATH @ Jul 3, 2008 - 7:16 PM...   Jul 24, 2008 - 8:32 AM
- - DEATH   Cont. The Job: Replace all heater and coolant hos...   Jul 7, 2008 - 4:52 PM
- - D-Man   Did you ever go to the Dyno Event at Turbochargers...   Jul 17, 2008 - 8:55 AM
- - DEATH   Nope - My spot is still on reserve tho. Waiting fo...   Jul 17, 2008 - 10:01 AM
- - D-Man   oh, you gotta buy that new boost gauge before you ...   Jul 17, 2008 - 10:13 AM
- - DEATH   No - Not a new Boost gauge [That's for you ret...   Jul 17, 2008 - 10:30 AM
|- - D-Man   QUOTE (DEATH @ Jul 17, 2008 - 10:30 ...   Jul 17, 2008 - 10:52 AM
- - DEATH   Not necessarily. The stock ECU knows full well wha...   Jul 22, 2008 - 11:47 AM
- - D-Man   oh right, I forget the 3s you've got was made ...   Jul 22, 2008 - 11:54 AM
- - darthripley   ^ that's just at stock boost which is 8psi, un...   Jul 22, 2008 - 2:29 PM
- - D-Man   Nope, it was at stock. Just remember i'm runni...   Jul 22, 2008 - 2:55 PM
- - DEATH   You already have a rebuildable turbo so it's j...   Jul 22, 2008 - 3:12 PM
- - D-Man   No... What do i have to buy FROM you to FUND the c...   Jul 22, 2008 - 3:55 PM
- - zero07   And you wanted us to leave you behind..........Dea...   Jul 24, 2008 - 11:01 AM
|- - DEATH   QUOTE (zero07 @ Jul 24, 2008 - 11:01...   Jul 24, 2008 - 11:20 AM
- - darthripley   hopefully replacing the starter fixed the hot star...   Jul 24, 2008 - 2:00 PM
|- - D-Man   QUOTE (darthripley @ Jul 24, 2008 - 2...   Jul 24, 2008 - 2:20 PM
- - DEATH   GT2 but "Muchos Garcias" Ripley - It j...   Jul 24, 2008 - 2:32 PM
- - Havok1997GT   D-man, Im not going to be stock much longer (as s...   Jul 24, 2008 - 5:45 PM
- - darthripley   QUOTE (DEATH @ Jul 24, 2008 - 3:32 P...   Jul 24, 2008 - 6:05 PM
- - DEATH   You wanna know how I tracked mine down? I added a ...   Jul 25, 2008 - 3:02 PM
- - darthripley   that's a great way to find vac leaks. luckily ...   Jul 25, 2008 - 6:21 PM
|- - lubu   QUOTE (darthripley @ Jul 26, 2008 - 7...   Jul 26, 2008 - 12:54 AM
- - darthripley   QUOTE (lubu @ Jul 26, 2008 - 1:54 AM...   Jul 26, 2008 - 3:16 AM
|- - lubu   QUOTE (darthripley @ Jul 26, 2008 - 4...   Jul 26, 2008 - 4:15 AM
- - DEATH   Blingy chromy type stuff seemed to be the order of...   Aug 11, 2008 - 3:29 PM
- - darthripley   STB looks good! the heat shield will turn gold...   Aug 11, 2008 - 4:26 PM
|- - DEATH   QUOTE (darthripley @ Aug 11, 2008 - 5...   Aug 11, 2008 - 4:28 PM
- - CelicaST_CALI   can someone sum up this thread in a single post pl...   Aug 11, 2008 - 4:49 PM
- - 95celgt   are those splitters i see??!? i just fixed m...   Aug 11, 2008 - 4:52 PM
4 Pages V   1 2 3 > » 


Reply to this topicStart new topic
20 User(s) are reading this topic (20 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 12:45 AM