FS: 3sgte 2.2 knife edged stroker kit Options

[crankshaft]

The kit includes:

1- a knife-edged,balanced, lightened and polished crankshaft, with correct journal size. (Baked to relieve stress)
2- Custom CP 9:1 Comp. 86.5mm .20 over Stroker Pistons
3-Rings
4-Eagle 4340 H-beam connecting rods
5-ACL main bearrings, ACL connecting rod bearrings and ACL thrust washers

Note: an st165 3sgte flywheel or 5sfe flywheel will be needed. I strongly recommend an aftermarket flywheel such as fidanza.The 3sgte is better as you can use a 3sgte clutch. With the 5sfe , you have to use a 5sfe clutch. It is also lighter.
$1900

Feel free to ask questions or PM me






This post has been edited by crankshaft: Mar 28, 2008 - 9:43 PM

[CelicaGT04]

[quote name='crankshaft' date='Mar 29, 2008 - 7:29 AM' post='659445']
[quote name='presure2' date='Mar 28, 2008 - 11:39 PM' post='659412']
there is no need for 3 topics to sell the same stuff.

i closed the others.

you have a better chance of selling this stuff on mr2oc, or alltrac.net, or ebay. hi. I understand the way you feel and im sorry. but the fact is if you look again youll notice its not the same stuff. i may have used some of the same 2.2 crank pictures to show bolt pattern on the stroker cranks and kit. but im not selling the same stuff one is a complete stroker kit, one is a 2.2 stroker crankshaft and one is a 2.0 3sgte crankshaft. clearly not the same items at all, three separate items :one stroker kit, one stroker crank and one stock crank. Clearly not the same thing I dont understand your point of view.but none the less I am ver sorry I thought perhaps your community could apprecciate the best quality and craftsmanship. once again Im sorry
[/quote
[/quote]


Sorry to hear your entrepreneurship being brought to a halt.. would you take core return on this kit as well?

[crankshaft]

[quote name='CelicaGT04' date='Mar 29, 2008 - 10:54 AM' post='659498']
[quote name='crankshaft' date='Mar 29, 2008 - 7:29 AM' post='659445']
[quote name='presure2' date='Mar 28, 2008 - 11:39 PM' post='659412']
there is no need for 3 topics to sell the same stuff.

i closed the others.

you have a better chance of selling this stuff on mr2oc, or alltrac.net, or ebay. hi. I understand the way you feel and im sorry. but the fact is if you look again youll notice its not the same stuff. i may have used some of the same 2.2 crank pictures to show bolt pattern on the stroker cranks and kit. but im not selling the same stuff one is a complete stroker kit, one is a 2.2 stroker crankshaft and one is a 2.0 3sgte crankshaft. clearly not the same items at all, three separate items :one stroker kit, one stroker crank and one stock crank. Clearly not the same thing I dont understand your point of view.but none the less I am ver sorry I thought perhaps your community could apprecciate the best quality and craftsmanship. once again Im sorry
[/quote
[/quote]

Your right after thinking about it i could have put it all together.
Sorry to hear your entrepreneurship being brought to a halt.. would you take core return on this kit as well?
[/quote]