my car wont start, 3sgte swap..... |
my car wont start, 3sgte swap..... |
Oct 15, 2003 - 11:47 AM |
|
Enthusiast Joined Apr 10, '03 From South Central Los Angeles Currently Offline Reputation: 0 (0%) |
OK. Have been working on the 3sgte swap into my 94 st. i have everything done. Last night arround 11:00pm , we tried to start the car.
everything is hooked up correctly ( i hope so ) but when i turn on the key all i hear is the fuel pump pumping and that's it. It doesn't try to crank at all. I have good power cause all the electrical is working fine. but i checked and we are not getting any kind of spark on the sparkplug wires. what could it be? i need help ppl. HELP ........ This post has been edited by sphinx_race911: Oct 15, 2003 - 11:48 AM |
Oct 15, 2003 - 1:20 PM |
|
Enthusiast Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) |
Yeah, hopefully you replaced all of the little things...such as coil, cap, rotor, etc. Check these things...and hopefully one of them will be the problem as they are less expensive than other parts. If this isn't your problem, have the starter tested?
Also, I had a problem when doing the JDM swap on my parents' 626 in which just one of the wires in the harness came loose that were related to ignition. Just make sure all connections are good and check those few parts. Hopefully your problem will be solved. -------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
Lo-Fi Version | Time is now: December 2nd, 2024 - 10:55 PM |