![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) ![]() |
Found in my archive the Skyline model that I did back in 2002.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() This post has been edited by tomazws: Sep 8, 2009 - 12:24 PM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 30, '04 From So Cal Currently Offline Reputation: 13 (100%) ![]() |
Digged up an old thread for more show and tell
![]() Car ready to be sprayed! ![]() A layer of blue... very dull looking after dried ![]() Better looking after a couple layers and a clear coat ![]() I wanted to make the headlights light up, so I drilled 2 holes on each headlight socket for the LEDs ![]() LEDs inside the headlight socket or whatever u call that piece ![]() Car didn't come with an engine, so there's lots of empty space for me to work with wiring up the LEDs ![]() Rear lamp LEDs ![]() The rear lamps are a bit tricky, I just basically glued everything down... ![]() I cut some plastic off the frames to support the LEDs ![]() As for the interior, I didn't do anything special. I just followed all the color codes in the manual ![]() My camera "skills" from back in the days... ![]() You can totally see the brush strokes.... ![]() Picture of the bottom of the car.. ![]() After polished and waxed, and then put everything together! ![]() This post has been edited by tomazws: Sep 8, 2009 - 12:24 PM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 20th, 2025 - 3:33 PM |