6G Celicas Forums

Welcome Guest ( Log In | Register )

> Rear Speaker Install, & Rear seats removal
post May 2, 2008 - 8:12 PM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




I just Installed my New Rear Speakers and as I finished putting the speakers in. I thought I'll do a write up so....

Tools


and wire crimps (but not needed if your using a soldering iron)
New Speakers 6.5"
Time: about 2 hours


First thing you have to do is remove the rear seats. Easier to move if you take out the parcel tray, unclip the back rest, so it folds down. Undo the velcro push the carpet in the boot/trunk back as you need to undo the (x4) buttons (green circle top, and purple bottom) hold the flap under the seat up and undo (x4) bolts (Gold circles) on the bottom of the Back rest, push the back rest down into the seat so they clear the clips next to the bolts

(another view)




DO NOT REMOVE THE MOUNTING IN THE MIDDLE FOR THE BACK REST

(this holds and moves the Back rest up and down, its unnecessary to do so, and could put the back rest out of alignment )




Now with those out the way we can remove the seat, you might want to use a screwdriver to prey up the seat, as there are (x2) clips holding it down, push the seatbelts through the hole, then just lift the seat up over the mounts.

Now the easier part; remove the speaker cover and panel. Remove the (x5) bolts in the green circles


Remove the srews in the gold circles (the green ones remove the speaker mounting, you could now go out and buy some speakers with this, making sure that the speakers will fit )


Install & wire up your new Speakers (you might need smaller screw heads so hold the speaker, but these could come with the speaker)
(CHECK YOUR SPEAKERS GO)

Then start putting the panels back in.



The rear panel has to go in behind the boot panel, watch out for your seatbelts, then push the panel in so it 'snaps' into place Screw that bottom screw in last (in the above picture) so the panel doesn't wobble and make noises

Then put the seats back in*


(apply some pressure and it will 'snap' into place) make sure you bring your seltbelts back through the hole


*(Always remove cats from your comfy seats before install)

(another view)

then clip back your parcel tray back in

Enjoy your New Speakers installed by you

This post has been edited by Rusty: May 15, 2008 - 9:58 PM


--------------------
 
Start new topic
Replies
post May 7, 2008 - 1:42 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




yeah it is DS
well we have a front speaker one might as well have a rear one, but yes you are right. I just didn't want to brake anything


--------------------

Posts in this topic
- Rusty   Rear Speaker Install   May 2, 2008 - 8:12 PM
- - njccmd2002   nice, how much for the speakers,   May 2, 2008 - 8:17 PM
- - Rusty   their the 2008 model about NZ$70 have to say...   May 2, 2008 - 8:24 PM
- - Spart   Ha! I was looking for something like this a we...   May 5, 2008 - 9:25 PM
- - creis   QUOTE you stole my cat, give it back.... on second...   May 6, 2008 - 12:53 AM
|- - BloodyStupidDavey   QUOTE(creis @ May 6, 2008 - 6:53 AM)...   May 6, 2008 - 2:12 AM
- - CelicaST_CALI   plz god tell me u named him Garfield...   May 6, 2008 - 12:59 AM
- - Rusty   lol nah it's a she I could lift the tail up t...   May 6, 2008 - 3:55 AM
- - Sinyk   Nice writeup. I did mine the lazy way and just rea...   May 6, 2008 - 10:45 AM
|- - DEATH   QUOTE(Sinyk @ May 6, 2008 - 10:45 AM...   May 6, 2008 - 11:44 AM
- - lubu   Nice, I bet the soldering iron is Dick Smith's...   May 6, 2008 - 11:13 AM
- - Rusty   yeah it is DS well we have a front speaker one mig...   May 7, 2008 - 1:42 AM
- - gate4sweden   Hi good job! i just want to say tha you diden...   May 7, 2008 - 4:36 AM
- - DEATH   No - this is def a good write up and a good write ...   May 7, 2008 - 12:59 PM
- - Rusty   did a little fix up & added a 2 more pics   May 15, 2008 - 9:59 PM
- - joehernandez   nice write up! the cat looks really tired thou...   May 15, 2008 - 11:51 PM
|- - BloodyStupidDavey   QUOTE (joehernandez @ May 16, 2008 - 5...   Jun 7, 2008 - 5:49 AM
- - presure2   good job. added to the stickys!   Jun 7, 2008 - 5:43 AM
- - Rusty   thanks presure2 you wouldn't believe how much...   Jun 8, 2008 - 2:17 AM
- - delusionz   Looks like your aftermarket speaker fit straight i...   Jun 9, 2008 - 7:08 AM
- - Rusty   nope no need for mounting plates, the screws holdi...   Jun 10, 2008 - 1:45 AM
- - delusionz   Hey, The back seats in my 96 SS-III have different...   Jul 8, 2008 - 9:58 PM
- - Rusty   QUOTE Hey, The back seats in my 96 SS-III have dif...   Jul 10, 2008 - 3:30 AM
- - RickJamesBish   QUOTE (creis @ May 6, 2008 - 1:53 AM...   Oct 16, 2008 - 5:34 PM
- - Rusty   OMG...it's a C A T lol   Oct 22, 2008 - 2:23 AM
- - RickJamesBish   And also, I never took out my rear seats. Just pop...   Oct 22, 2008 - 2:40 PM
|- - Superaison   QUOTE (RickJamesBish @ Oct 22, 2008 - 2...   May 21, 2009 - 8:00 PM
- - Superaison   I just baught literally the EXACT same speakers fo...   May 15, 2009 - 9:32 PM
- - Rusty   good, I just want to learn a good setting for my a...   May 21, 2009 - 3:37 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 12:21 AM