Cd-player installaton problems, HELP Options

[mikecelica]

I had an old aftermarket cd-player in my car till last week when I bought a different one. My in-dash wiring for the cd-player wasnt in harness just loose wires connected to the old cd-players wires (obviously electric taped too). So I removed all the wires for the old cd-player and took it out and tried to connect the new deck to the car but something is wrong. The power line is supposed to be the ' blue with yellow stripe' and connect it to the red wire of the cd-player. But it doesnt work for some reason, I connected the ground wire of the dash to the cd-player's and then connected the battery wire then the accessory wire but nothing. The new cd-player wont start, which is weird cuz earlier that day I took this deck off someone else's car and it was working perfectly. Is it the 'blue with yellow stripe' the power line and the grey wire the accessory wire? Anyone been in this situation. Plus i did read the pdf file in the sticky about doing this but still not sure whats wrong. Anyone know plz help. thanks
btw. its a sony xplod cd deck

This post has been edited by mikecelica: May 11, 2008 - 3:14 PM

[torhne]

yeah check the installdr link a few posts up, i used it and it worked perfect.