6G Celicas Forums

Welcome Guest ( Log In | Register )

> Enginel lagging at low rpm
post May 13, 2008 - 9:16 PM
+Quote Post
Davesceli

Enthusiast
**
Joined Apr 24, '04
From S. Cali
Currently Offline

Reputation: 0 (0%)




I've been having problems with this for awhile...first it was bad plug wires, so i changed those along with a new cap and rotor, everything was fine untill about a week ago. Now the car is bogging down at low rpms, usually when starting from a complete stop. I have to rev the engine a bit to get it moving normally. It only happens from idle to about 25-3000 rpm. From 3000 up the car is nice and smooth. Any suggestions??? Next on my to do list is new plugs.

thanks



 
Start new topic
Replies
post May 14, 2008 - 2:27 PM
+Quote Post
stephen_lee



Enthusiast
*****
Joined Mar 22, '07
From Houston, TX
Currently Offline

Reputation: 4 (100%)




it could be valve timing if it takes higher rpms to get power from a 7A, and 'bogging' at lower RPMs. but for sure check for vacuum hoses off/damaged and check and replace plugs, wires, and cap/rotor. is your CEL light on?


--------------------
QUOTE
"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH

1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED
1995 ST: SOLD @273k miles, Auto, all power, CarPC, White
1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810
1994 Lexus LS400: This is my new DD

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 7:13 AM