3s-gte... |
3s-gte... |
Oct 18, 2003 - 12:25 PM |
|
Enthusiast Joined Oct 18, '03 From cincinnati Currently Offline Reputation: 0 (0%) |
A 3s-gte from a st-205 will drop into a st204 right?
|
Oct 19, 2003 - 9:11 PM |
|
||
|
i'm with supersprynt here is what you should look at http://www.6gc.net/forums/index.php?showtopic=1448 there is the feasible engine swaps sticky if you have a 98 and up GT then you will have a hard time swapping in the engine because the binary codes for the USDM electronics have not yet been released by toyota. which means that you would have to redo your entire fuel system with a stand alone management system. ORRR have someone with access to those codes do it for you. ex: EL prototypes the 3rd gen 3s-gte has a bigger head and bigger ports and a bigger intake manifold. but on the 2nd gen 3s-gte you can boost to around 16 or 17 psi on stock internals and have over 300hp easily that should be enough for most people anymore than that you wont be asking questions like this on here not trying to be a dick and if anyone else thinks so dont mention it you need to research more into this This post has been edited by Matthew: Oct 19, 2003 - 9:37 PM |
||
Lo-Fi Version | Time is now: November 28th, 2024 - 2:54 AM |