 7AFE Budget Build!!!, ***not cable friendly*** |
 Apr 9, 2008 - 8:22 PM
|
 
|
 Enthusiast  Joined Jan 13, '06 Currently Offline Reputation: 0 (0%)  |
I know this should probably be in another section.
well my 7AFE in a corolla has been turbo'd since march of 2006 i believe. its my daily driver first i started at 5psi and worked my way to 12-15psi. haven't ran into any major problems with it. about 6 or so months ago i started getting smoke at the tail pipe after sitting at idle for a while. then as time progressed the problem got worse. Three months ago i did a compression test because blow by was pushing out excessive oil out the breather hose and found cyl 3 and 4 to be out of spec after putting a lil oil in it it shot up which meant rings were no good. The problem got worse, i had oil being pushed of nearly every seal that could leak. On 3-30-08 Sunday when i was in Houston it started smoking so badly it became undriveable, i left it there went back the next weekend 4-5-08 and stared tearing it down. Damage found - on cyl 3 in between the first and second rings the piston broke(i guess you can say the ring spacer) i was able to take a peace of it out with my hands in one of the pics you can see this area missing. on cyl 4 there are two cracks in the same section as cyl 3 piston. visual inspection of rings shows no damage. visual inspection of cyl walls shows no damage. (i know pic quality sucks  )                  ---------------------------------------------------------------- This post has been edited by southwest2118: Apr 26, 2008 - 8:02 PM |
 |
Replies
|
May 15, 2008 - 12:08 AM
|
|
 Enthusiast Joined Oct 7, '06 From wyomissing pennsylvania Currently Offline Reputation: 2 (100%) |
hmm
any whats your eta on gettin this back on the road? looks like you;ve made some descent progress so far. and how much hp was it puttin down at like 8-10 psi? i cant see anything good happening on a somewhat stock bottom & top ends runnin 15psi+ -------------------- you know why they put sheep at the edge of a cliff.... that way they push back!
    (2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss (2:28:08 AM) edit: that did the trick |
|
May 17, 2008 - 1:32 AM
|
|
|
Enthusiast Joined Jan 13, '06 Currently Offline Reputation: 0 (0%) |
QUOTE (jason @ May 15, 2008 - 12:08 AM)  hmm any whats your eta on gettin this back on the road? looks like you;ve made some descent progress so far. and how much hp was it puttin down at like 8-10 psi? i cant see anything good happening on a somewhat stock bottom & top ends runnin 15psi+ next weekend i hope its ready. i'm having some issues with ring gap - three are somewhat alright, one cyl is set up for full drag  it'll be alight |
Posts in this topic
southwest2118 7AFE Budget Build!!! Apr 9, 2008 - 8:22 PM
southwest2118 as of right now 4-9-08 i'm waiting on the guy ... Apr 9, 2008 - 8:26 PM jesterwr217 damn that sucks hopefully everything gets fixed an... Apr 9, 2008 - 8:35 PM
southwest2118 QUOTE(jesterwr217 @ Apr 9, 2008 - 7... Apr 9, 2008 - 8:40 PM jesterwr217 QUOTE(southwest2118 @ Apr 9, 2008 - 9... Apr 9, 2008 - 8:54 PM Batman722 how many miles did it have ?
you were boosting up ... Apr 9, 2008 - 8:46 PM southwest2118 QUOTE(Batman722 @ Apr 9, 2008 - 7:46... Apr 9, 2008 - 9:08 PM jesterwr217 haha yea 70 is waaaay too high Apr 9, 2008 - 9:14 PM southwest2118 Well yesterday(4-25-08) i got my block and head ba... Apr 26, 2008 - 8:00 PM jesterwr217 looks like the same 5 bolt pattern call em up and ... Apr 26, 2008 - 8:16 PM xinginteg how much did the machine shop charge you for the w... Apr 26, 2008 - 8:51 PM southwest2118 the rod caps have a "2" stamped on all f... Apr 26, 2008 - 8:58 PM normality78 well bro, you got to get a decent camera May 1, 2008 - 3:14 AM dans_st are you doing any work/modifications to the head? May 14, 2008 - 12:57 AM stephen_lee damn bro i got mt block bored, honed, and cleaned ... May 14, 2008 - 1:14 AM southwest2118 QUOTE (dans_st @ May 14, 2008 - 12:5... May 14, 2008 - 11:39 PM |
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 8:38 AM |