FIXED: Hood gap issue b/c of strut bar, cusco brace | updated w/final pics & info Options

[snapshotgt]

Having this issue becuase of my cusco 2pt strut bar. First off, sorry for the poor pictures - low light and not much time:

Drivers side:




This brace:


Right hand, better condition:


On a side note:





Suggestions welcome for the hood gap.
I know some have been able to fix this issue.
Btw, the issue is becuase this bar is for a st205 (different hood).

Thanks-

[D-Man]

X2 W/ pressure2.

I'd trim out the inside of the hood a bit; it'll hold. (remove some of that insulation first!) also, when it comes down to a few MM, then grab some washers and secure them between the frame & the fender @ the bolts. (there's 3 under the hood there) and just a FEW MM isnt a noticible difference to flex the fender. Not a few inches, a few MM!! lol.

But please dont raise the hood in the rear. That'd look retarded as well as throw off the lining of the hood + fenders even more...