Sleeves for the 5sfe, Can it be done? Options

[Havok1997GT]

Ok, my understanding is that its really hard to bore a 5sfe because the cylinder walls are so thin. My understanding is that its not even worth it because its to easy to bore to much and weaken the cylinder walls so bad that it could cause cracking or stress fractures. Or that what you could bore out wouldnt make a big enough difference in the end.

Well me and a friend of mine where talking the other day about how i want to take my spare 5sfe and do the 5sfte upgrade. I was telling him that i wouldnt be able to run to much boost because the engine wouldnt be able to handle it. he said that i could bore it out and put sleeves down to make up for what was bored out and i would be able to handle higher compression and would be able to run higher boost. Now he is a Honda fan and has been working on cars since he was like 10 and has been building Hondas since he could drive. he really doesnt know a lot about Toyotas but he is a fantastic tech.

Can this be done? Has it been done? and what kinda of boost gain has come out of doing this kinda work?

This post has been edited by Havok1997GT: May 27, 2008 - 3:28 PM

[DEATH]

Read my edit above BTW.

You have to remove some/most of the fuel system to boost yes: Injectors, Fuel pump. The ignition can be done without upgrades [in fact stock is best in some cases - OEM Plug Wires > Autozone Wires etc.].
That doesn't mean you shouldn't [IMO] upgrade to a MSD coil, NGK plugs etc. but gone are the days when we thought you had to run an MSD BTM or the like.

This post has been edited by DEATH: May 27, 2008 - 3:52 PM