 quick relay question |
 May 30, 2008 - 5:15 PM
|
 
|
 Enthusiast  Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%)  |
Im hooking up a relay. I have these wires..
White Black Red Yellow Blue. From my understanding, white and black are for the magnet that "flips the switch, and the rest of the wires get hooked up based on if you want the relay to be NO or NC. I wired the white wire to power. However, when I put a multimeter to the black wire (that should hook up to a ground), I noticed that i also get 12v there. This is normal right? I can just send that to a ground without issue to make the relay click on, right? This post has been edited by lagos: May 30, 2008 - 5:15 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
BloodyStupidDavey QUOTE (lagos @ May 30, 2008 - 11:15 ... May 30, 2008 - 5:26 PM lagos well, the relay does click when i give power and g... May 30, 2008 - 5:31 PM
BloodyStupidDavey QUOTE (lagos @ May 30, 2008 - 11:31 ... May 30, 2008 - 5:35 PM lagos Attempting to control the factory TVIS system by a... May 30, 2008 - 5:38 PM stevest202 85 and 86 control the magnet here how i wired my r... May 31, 2008 - 3:12 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 4:50 PM |