shutter while cruising Options

[rjbibeau]

i just got tuned on thursday at the dyno...only made 6psi cuz i have a clocked turbo and the actuator the way i have it mounted must not be closing properly. i trailered the car back and took the car for a cruise on sat. At 3000 rpm i get this once in awhile occuring shutter like the throttle stops and then regains itself. probably a misfire. and then i can't go above 5,000 rpm it hits a brick wall. also it threw a CEL so i got to autozone today to see what code it is. it's a misfire cylinder #1 and also of a lean mixture. would this explain my symtoms. lady said it's probably your FPR...this will give you excessive gas consumption. could the the stock regulator give me these problems? or am i supposed to be running an adjustable FPR. I'll ohm test the wires to see if they pass. the plugs all look good and the cap and rotor are relatively new.

also a question on those AEM universal FPR. i undersand you have to set base FP at 43. i have been reading to use a 1:1 ratio....is this somehow incorporated into this unit or does it have to be manually set. i know the vortech FMU is capable of doing this but is the AEM the one i want?

This post has been edited by rjbibeau: Jun 7, 2008 - 12:48 PM

[rjbibeau]

i'm runnig the perfect power smt6 fuel system. am i able to keep the stock FPR on my rail with my current setup after i fix the wastegate issue so i can boost 10psi.

would posting my fuel and ignition maps on here give a little better understanding

This post has been edited by rjbibeau: Jun 7, 2008 - 1:06 PM